PXR3 Instruction Manual - Coulton Instrumentation

Output limit types (Setting range: 0 to 15)[Description]• This parameter sets whether to maintain the value withinthe limit or to break the limit when the output value increasesup to the limit set value.Output value(beyond the limit)103%PHCLimitPLC-3%Breaking the limitPLCBreaking the limitLimitPHC Output value(under the limit)PCUT0123456789101112131415Output 1 Output 2Upper limit Lower limit Upper limit Lower limit103%103%LimitLimit103%103%LimitLimit103%103%LimitLimit103%103%LimitLimit-3%Limit-3%Limit-3%Limit-3%Limit-3%Limit-3%Limit-3%Limit-3%Limit103%103%103%103%103%103%103%103%LimitLimitLimitLimitLimitLimitLimitLimit-3%-3%-3%-3%LimitLimitLimitLimit-3%-3%-3%-3%LimitLimitLimitLimit[Setting example] Selecting the operation that outputs 1 and 2 are maintained within the upper and lower limitsDisplayOperating procedurePV indication1.2.3.4.5.Press and hold the SEL key for five seconds.will be displayed.Press the key to display .Press the SEL key once.The current setting ( ) will be displayed.Press the or keys to flicker and to display .Press the SEL key once. will be displayed and will be registered for . After that,the controller will operate with outputs 1 and 2 maintained within the upper and lower limits.(Repeat the procedure from 3 to 5 to check the set value.)SV indication6.If you want to display the operation status, press and hold theThe SV will be displayed on the display area.SEL key for two seconds.PV indicationIf unoperated state continues, the PV will be displayed.57