NetEx EFT213 Reference Manual Rel 5.4

DEBUGON Alias Command & DBGON scriptDescriptionAn alias for setting the debug parameters. This command should be used specifically under the direction ofNetEx Support personnel. This will produce an overabundance of messages (for the client only) which can beused to aide in diagnosing problems encountered by users. (Because of the volume of output, we recommendthat your 3270 emulator be in logging mode so the output can be sent to NetEx Support for analysis.)This alias and script are only to be used under direction from NESi Support.FormatCommand Qualifiers ParametersDEBUGONWhere:DEBUGONRelated Topics(required) the verb for this command. The minimum spelling is DEBUGON. The Debug settingswill resemble the following:CONnect ........... onCOUnt ............. 4096CRC ............... onDIScard ........... offFILe .............. onHEX ............... offHSM ............... offINPut ............. onINTerval .......... 0LOCal ............. onLOG ............... onMEMory ............ offMESsages .......... onMVS_DIAGNS ........ onPARse ............. onPROTocol .......... onRECeive ........... onREMote ............ onSENd .............. onTCP_READ .......... onTCP_WRITE ......... onPage 176 General Alias Commands REF-eFT213-R5.4-08