AWS 924-948 - Solid State Logic

Analogue OperationsDAW setupDAW setup parameters can be found in section 4 of this manual; see page 4-3 for more details.Desk settingsScribble Strip Brightness: Use this to adjust the channel scribble strip brightness (range: 1-6)Turn Off Display After:Shuts off the TFT display after a predetermined time: 30 mins to 5 hours in30 minute increments.The scribble-strip displays can be turned off by turning the control pot clockwise (beyond 8 or 6) to ‘Off’.On occasion, when changing the status of some of the above functions, you will be prompted to reboot your AWS console.It is possible to do this without reaching the Power switch at the rear of the console through the addition of a soft menuRESTART. When you select this you will be prompted to CONFIRM and your console will reboot.Page 3-30AWS 924-948 Owner’s Manual