AWS 924-948 - Solid State Logic

AWS 948 TutorialMixing ConfigurationsWhen mixing in In-line mode, the secondary channel path can be employed either as an additional send from the channel,as the right input of a stereo signal, or as an independent additional input path, allowing up to 48 signals to be mixed on theconsole. Because channels are independently configurable, additional inputs might be assigned to channels not requiringextra sends, allowing those signals that do require the extra send to take advantage of both channel paths.basic Stereo MixdownBasic stereo mixdown uses the channel in Stereo mode:StereoDAWtrackoutChan 1Input:Line InLeft,Line InRightChannel Path ASignalProcessingChannel Path BFXSendsMix busFX rtnsMonitoringStereoMasterExternal processingDAWAdditional Send MixingIn the Additional Send configuration (In-line Mix mode with the in-channel reTurn switch unselected), the secondchannel path can be sourced pre- or post-fader, and each of the sends can be switched between them. This allows for a highlevel of flexibility of send leveling and automation. The channel’s signal processing is applied to both channel paths. The V-pot controls the additional send level and the fader the main channel contribution to the Mix and/or Record busses.DAWtrackoutChannel 1Input:Line In LChannel Path ASignalProcessingChannel Path BFX SndsMix busFX rtnsMonitoringStereoMasterTrack bus 1External processingDAWPage 2b-6AWS 924-948 Owner’s Manual