AWS 924-948 - Solid State Logic

AutomationMix ReviewAt any time you can rewind the system, and as soon as the DAW is located to an earlier time and valid MTC or a MMClocate position command is received, the mix system enters ‘Mix Review’. All faders will switch to Replay status (all LEDsare off). This operation is known as a rollback.Indicates how many timesyou have rolled back. Everytime the Mix Reviewnumber will increase by 1.Mix Running StatusDisplayed while writingnew automation data;Mix Review StatusDisplayed when rolled backand playing previousautomation data.When the DAW returns to Play, previously written automation data is replayed. If no faders are returned to write, allfaders in write at the start of the mix will drop back into write at the point where the DAW was rewound (the ‘rollbackpoint’, and the Mix status will return to Mix Running. Whilst in Mix Review you may rollback as many times as required toallow the mix to be built up fader by fader. Each time a rollback takes place, the rollback counter in the mix status displayincrements. Faders in write at a rollback point will automatically switch to write when the system plays through the rollbackpoint.AWS 924-948 Operator’s Manual Page 7-7