AWS 924-948 - Solid State Logic

AutomationCut AutomationPressing a Cut switch will toggle its state and automatically start writing data. It can be returned to replay either by rollingback or by selecting the soft Play key, then pressing the cut switch.The state of the channel Cut switch is stored separately from the fader data. Cut data is stored regardless of the currentfader status unless channel Safe mode is selected. Whenever the Cut switch is in write, a ‘*’ symbol is displayed in thescribble strip above the fader.Match followed by the Cut switch drops the channel into Write without changing the current state of the Channel Cut.Match and Play are mutually exclusive. If one is active, selecting the alternate function cancels the first one.Match and Play are automatically deselected after each operation unless the Latching option is enabled in the Setup Menu.If you have made a cut error, positionthe DAW before the error, resumeplay, select Match and then press Cutto automatically drop into writewithout changing its current state.When the cut has been over written,select Play and then press Cut toresume playing original automation.AWS 924-948 Operator’s Manual Page 7-9