AWS 924-948 - Solid State Logic

IntroductionThe Default Button 4-10Resetting Pans 4-10Resetting Faders 4-10Resetting Sends 4-10Resetting Plug-ins 4-10Channel Functions 4-11DAW Meters 4-11Status Indicators 4-11Multi-channel Metering (TDM Systems Only) 4-11Channel Fader 4-11Fader Grouping 4-11Channel Solo and Cut Tile 4-12Solo Isolate 4-12Channel SEL Button – Track Arming/Edit/Select 4-13Record Ready Mode 4-13Record Safe 4-13Working with the Channel V-pots 4-14Setting Sends Pre/Post Fader 4-15Muting a Send Output 4-15Flipping Send Levels to the Faders 4-15Input, Output and Send Routing 4-16Viewing Input, Output and Send Routing 4-16Setting Input, Output and Send Routing 4-16Assigning Signals to Multiple Channels 4-16Assigning a Channel to Multiple Outputs 4-16Motion Control Panel 4-17Transport Controls 4-17Other useful transport modes 4-17AWS Footswitch Control 4-18Zoom, Navigation and Selection Modes 4-19Navigation Mode (Neither Zoom nor Select lit) 4-19Zoom Mode (Both Zoom and Select lit) 4-19Select Mode (Both Zoom and Select Flashing) 4-19Scrolling Within a Window 4-19Shuttle/Scrub Wheel 4-20Numeric Keypad 4-20Working with Markers/Memory Locations 4-20HUI Plug-in Control 4-21Plug-In Editor 4-21Plug-In Editor Display 4-21Plug-In Editor Controls 4-21Paging Buttons 4-21Selecting DAW Channels to Edit 4-21Plug-In Display Modes 4-22Viewing Current Inserts (Insert Mode) 4-22Assigning a Plug-In or Hardware I/O (Insert Mode) 4-22Editing Plug-In Parameters (Parameter Mode) 4-23Selecting a Plug-In to Edit 4-23Changing Plug-in Parameters 4-23Hi-Resolution Parameter Display Mode 4-23Comparing Your Changes 4-23Bypassing Plug-ins 4-23V-pot Sensitivity 4-23Page XVIAWS 924-948 Owner’s Manual