AWS 924-948 - Solid State Logic

DAW Control5Channel SEL Button – Track Arming/Edit/Select3 492113571068 11 12The function of the channel SEL ( 17SEL keys on the Master Control Panel.) button depends on the mode selected on the centre section RDY, EDIT and5Record Ready ModeIf RDY is selected all 24 channel SEL buttons become Record Ready buttons. Pressing a channelSEL button puts the DAW track into Record Ready (provided that the DAW track has an inputrouted). The REC tally above the meter flashes to show that the track is in ready.12 Ready AllTrack arming can be set or cleared across all channels by using the master RDY ALL button. Thisbutton flashes if any DAW tracks are in Record Ready. Pressing this switch while it is flashing willclear all track arming.16151416Record SafeTo put a DAW track into Record Safe (so it cannot be put in to Ready) hold down ALT and pressthe channel SEL button. Hold down ALT+OPTION then press any SEL button to set all tracksto Record Safe.17185 Edit ModeWith EDIT mode selected the channel SEL button can have a number of functions:19This function will only work for the first 8 DAW channels in Pro Tools V6.4 and above.Provided BYPASS ( 4 ) is off pressing one of the channel SEL buttons assigns the plug-in editor to that channel. TheEDIT tally on that channel will light to confirm that this is the edit channel.A double press on the SEL button will select the first plug-in in that channel for editing. Successive double presses will selectthe next plug-in in that channel.Selecting BYPASS ( 4 ) on the Master Control Panel changes the channel SEL buttons to Bypass buttons. Pressing achannel SEL switch will bypass all plug-ins on that channel. The channel EDIT flag will light to show that all plug-ins arebypassed.AWS 924-948 Owner’s Manual Page 4-13