AWS 924-948 - Solid State Logic

DAW ControlCommunication with your DAWThe AWS connects to your chosen DAW via three MIDI ports at the rear of the console or via MIDI over Ethernet. EachAWS DAW layer emulates three HUI or MCU controllers. The HUI and Mackie Control (MCU) protocol are widelysupported by DAW manufacturers.Section 1 details the MIDI and/or network connections between console and computer and the installation of theipMIDI driver software and how to configure Protools and Logic. Information relating to other DAW systems is includedlater in this section.Refer to your DAW manual for information on how to configure your software. Once configured and connected,communication with the DAW will be initialised, and the level of the AWS channel faders, rotary controls and masterfunctions will be set to match the DAW controls (provided you are in DAW Focus mode and have the right DAW layerenabled).When using your DAW without the AWS, you should remove the AWS from the MIDI controllers section of your DAW(please see the information specific to your DAW).Logic HandshakingLogic Audio uses a challenge - response system to automatically detect connected controllers when it boots up. This featurecan be enabled by selecting ‘Logic Handshake’ when choosing the protocol type in SSL > Misc > Setup. Selecting anyother MCU protocol will disable this feature.Additional details will found in section 1Page 4-4AWS 924-948 Owner’s Manual