11.07.2015 Views

AWS 924-948 - Solid State Logic

AWS 924-948 - Solid State Logic

AWS 924-948 - Solid State Logic

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

AutomationJOIN AND REVISEAt any time during Mix Review, the Join key can be used to switch all channels originally in write at the last rollback pointback to write at the levels or state they were at the rollback point. This is useful, for example, when balancing a chorus level.When you have achieved this balance, you can rollback, hit Join and the levels will punch in at the balance set before rollback,and all channels immediately return to write.The Revise key has a similar action except that all channels in write at theRollback point are returned to write at their current mix position. This is useful if you have been automating a section, butmade a small mistake. Just rollback prior to the mistake, hit Revise and the channels will immediately go into write at thecurrent fader level, allowing you to overwrite the mistake.Multiple Rollback memories are supported so that successive operations of Join or Revise return different sets of faders backto the write state, if multiple Rollback operations have taken place.To return all faders to Absolute,pressMix ReviewMix Running the Join or Revise keys untilthe Global Rollback memory isreached, at which point allJOINROLLBACK ROLLBACK GlobalRollbackPoint 2Point 1faders return to write either atPointTime the current position, via theRevise function, or at thePass 2 (Channels 1-6 inAbsolute)Pass 1 (All Channels inAbsolute)balance at the Global Rollbackpoint, via the Join function.Pass 3 (Channels 7-8 inAbsolute)Pass 4DiscardIf the system is in play or stopped following a Rollback operation with any faders or cuts in Absolute mode, Discard clearsany data made since the start of the Rollback pass and forces all channels in Absolute back to Replay. The Discard labelis only shown when there is Mix data to discard.Updating a Mix PassTo update a Mix Pass, select the desired Mix Pass from the list on the List Mix menu by turning the left V-pot and pressthe V-pot switch. ‘Updating Mix Pass’ will be displayed and the selected mix will now be the reference mix.Page 7-8<strong>AWS</strong> <strong>924</strong>-<strong>948</strong> Operator’s Manual

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!