AWS 924-948 - Solid State Logic

AWS 948 TutorialCenTre SeCTIOnAdjusting the Mix and record bussesTo assign control of the Record and/or Mix busses to the master fader, hold down thebutton at the base of the reCOrd or MIX columns of the bussing matrix next to thefader, and press the button in the row labelled FAder. Now move the master fader toadjust the bus level.Creating a Monitor MixPress MIX in the MOn SrC buttons monitor source buttons on the Monitor ControlPanel and ensure that the CuT button is inactive. Adjust the monitor level using the mainmonitor level pot.Creating Foldback MixesFoldback mixes can be quickly created using the Foldback section of the centre section.Select sources using the buttons down the right-hand side. The MIX pots control level for the sources totheir right. There is also an overall leVel control.using the FX returnsExternal FX processing such as reverbs and delays can be connected to the console’s four FX send busses.FX unit outputs can be returned back into the AWS via the four Stereo Return inputs in the console centresection. These can be routed to either of the foldback mixers, and to the record and mix busses.using TalkbackThe talkback controls are located to the right of the shuttle wheel. Press SlATe to sendtalkback to the Mix, Rec and Track busses, press Fb A or b to send it to the foldbacks, orpress Tb All to send to foldback A and B outputs. The black pots above the TFT screencontrol communications levels.AWS 924-948 Owner’s Manual Page 2b-11