AWS 924-948 - Solid State Logic

Analogue OperationsLevel ControlThe 100mm fader at the bottom of the channel strip controls the channel send to the Rec and Mix busses,as well as any other sends which are operating post-fader.Note that in DAW focus mode, this function can be assigned to the channel V-pot by pressing theCHANNEL button in the centre section.AWS 948The channel fader controls both components of a stereo signal. The relative level of the components (thebalance) can be adjusted using the V-pot.For In-line Track mode, the main fader controls the secondary channel path (monitor path), and theV-pot controls the primary channel path. In In-line Mix mode the channel fader controls the primarypath and the V-pot the secondary path. The controls can be flipped between channel paths by pressingon the V-pot.Selected Faders can all be set to 0dB using the Function keys: with none of the upper row of buttonsselected, press the 0dB softkey in the bottom row.The analogue faders can be automated using SSL’s automation system, or using A-FADA which allowsyour DAW automation to control the analogue faders. When in DAW Focus, the fader is used to controlthe track fader within the DAW.See Section 4 for more information on DAW control, and Section 7 for more information on SSL automationand A-FADA.924 and 948AWS 924-948 Owner’s Manual Page 3-13