AWS 924-948 - Solid State Logic

Total RecallTOTAL RECALLOverviewThe AWS Total Recall system uses the inboard TFT screen to give a graphical display of current and stored control settingsof all rotary controls, faders and switches on the AWS channel and centre section modules. Controls that are in differentpositions from the stored values are highlighted in white (faders and rotary controls) or yellow (switches). To providemaximum clarity rotary controls are shown as horizontal sliders and switches as boxes.Electronically latched switches (‘soft’ switches) in the channel strips, such as routing, EQ, Insert, Dynamics and Cut switches,can be reset to match the stored setup with a double-press on the fader switch.Stored setups can be copied or swapped between channels by holding down the fader switch on the source channel thenpressing the fader switch on the destination channel. If the Copy switch is selected the source channel settings are copiedto the destination channel: if not the source and destination channel settings are swapped. See Page 6-6.Up to 32 different TR setups can be stored in local memory on the AWS.An unlimited number can be saved via Logictivitythrough the AWS Remote browser. For legacy purposes, data saved as a MIDI SysEx file can also be loaded to the AWS byplaying through a MIDI SysEx track. See Page 6-9 for more details.Accessing Total RecallTotal Recall is accessed using the TFT screen and the soft keys beneath it.The 16 boxes at the base of the screen indicatethe functions assigned to the 16 buttons in two rows of eight below the screen.The four boxes above them indicate thefunctions assigned to the central four buttons in the row of six. Note that the two outside buttons are used for scrollingleft and right, where relevant.Use the soft keys to select SSL then TR to access the main Total Recall menu.AWS 924-948 Owner’s Manual Page 6-1