AWS 924-948 - Solid State Logic

AWS 948 Tutorialbasic Tracking ConfigurationFor basic tracking, channels can be a mixture of stereo and mono. The signal processing, cue and FX sends are available withinboth channel configurations. Sends to the DAW can be sourced either from the Channel Outputs or from the Track Busses,and the stereo master return from the DAW might be brought back into the console via either the External inputs or astereo channel. The EFX system can be employed to provide independent level to the DAW send. Mono-configured channelsuse In-Line Mix with the secondary channel path left inactive.Note that Channel Outputs are always mono. Stereo channels therefore need to be sent to the DAW using a pairof Track busses.Below are examples of how mono and stereo channels might be configured in basic mode. The stereo master return fromthe DAW may be brought back into the console using an eXT b input (as shown for the mono configuration) or a sparestereo channel (as shown for the stereo configuration). The monitors can be fed by a sum of the mix bus and the DAWreturn (as shown for the mono configuration) or by just the DAW (as shown for the stereo configuration).EFX is described in Section 3.Mono ConfigurationSignalProcessingChannel 1 Input:Mic In or Line In LeftChannel Path AChannelOutputDAWMix busMonitoringFoldbackCue Sendsext bStereo ConfigurationChan 1Input:Line InLeft,Line InRightChannel Path ASignalProcessingChannel Path BCueSendsTrackbus 1+2Mix busMonitoringDAWFoldbackChan 24Page 2b-4AWS 924-948 Owner’s Manual