AWS 924-948 - Solid State Logic

DAW ControlHUI PLUG-IN CONTROLPlug-In EditorAWS consoles come with a powerful Plug-in Editor located inthe console centre section. From here, plug-ins and hardwareinserts can be assigned, and plug-in parameters can be edited.Plug-In Editor DisplayThe Plug-In Editor uses a high resolution TFT display, four V-pots and four soft buttons to control the parameters of anyplug-in.The display is also used to show the position and status ofthe DAW and to provide access to a range of paged menus.The currently selected EDIT channel name is displayed at thetop of the screen. Next are the plug-in control displays. Justbelow this are the transport status displays and timecodedisplay.The bottom section is used for soft key menu selection.Plug-In Editor ControlsThe controls for the display are located just below the screenarea. The four V-pots and associated soft keys map to thecorresponding controls on the display. The V-pots also havepush-push select switches which perform various functions.The display also shows information from the DAW at the topof the editor display.Paging ButtonsThe left/right paging buttons page through either available insertslots in INSERT mode, or plug-in parameters inPARAMETER mode (see following page).Selecting DAW Channels to EditSelect EDIT mode on the Master Control Panel then use thechannel SEL buttons to choose the channel you wish to edit.The EDIT flag in the channel meter will light. The DAW willhighlight the selected channel and currently selected plug-in.Press ALT to display the plug-in window.Alternatively, select a channel by double clicking on one of theinsert points in the Mix window. Note that from V6.4 and aboveit will be necessary to move channels 9-16, 17-24 into bay 1 channels 1-8.112 3 42 3 4Bank switching channels leaves the Plug-In Editor with the channel assigned to it. The channel EDIT tally will showthis.AWS 924-948 Owner’s Manual Page 4-21