AWS 924-948 - Solid State Logic

AWS 948 TutorialAnalogue-style In-line Tracking ConfigurationIn In-Line Tracking mode, Channel Paths A and B are used for tracking and monitoring respectively. The V-Pot functions asthe ‘small fader’, controlling Path A’s record path to the DAW via the channel outputs. The main faders control the monitorlevel (Path B). The reTurn switch near the pan pot in the channel strip controls whether the monitor path is sourcedfrom DAW send from the record path or from the DAW return:band Tracking ModeFor multi-instrumentalist tracking, leave the reTurn switches unselected. The monitor path will therefore be fed fromthe channel output, ensuring that everything is heard, regardless of the DAW’s record status. Signal Processing can beassigned to either path, allowing it to be committed to ‘tape’ or restricted to the monitoring. Sends to the DAW can besourced either from the Channel Outputs or from the Track Busses.Channel 1rec Input:Mic In or Line In LChannel Path AChan 1OutputSignalProcessingCueSendsFoldbackDAWtrackinChannel Path BMixbusMonitoringOverdub/Playback Tracking ModeFor overdubbing, pressing the reTurn switches will switch the monitor path to be fed from the DAW return, allowingrecorded tracks to be auditioned. The channel outputs should feed the DAW and the DAW channels should be returnedto the monitoring paths in the channel from which they are sourced.Channel 1rec Input:Mic In or Line In LChannel Path AChan 1OutputChannel 1Mon Input:Line In RSignalProcessingChannel Path BCueSendsFoldbackMixbusDAWtrackinMonitoringDAW track outM-AuTO and S-Cue use the transport status to automatically control the send and return routing to the monitoringand headphone feeds, as described in Section 3.AWS 924-948 Owner’s Manual Page 2b-5