AWS 924-948 - Solid State Logic

DAW ConnectionEnabling ipMIDI on your AWSIn the SSL > MISC > SETUP menu, toggle the ‘MIDI connects via:’ setting to ‘Network’. Your console will nowcommunicate with your workstation via Ethernet. With ‘MIDI connects via:’ set to ‘MIDI ports’, AWS will communicate withyour workstation via the conventional MIDI connectors on the rear of your console.You will need to reboot the console after changing this option.Also in the SSL > MISC > SETUP menu, ensure that the ‘DAW’ option (workstation layer 1) and DAW2 (workstationlayer 2) are set to match your workstation or workstations if you are using the second layer. Please note that you will needto restart the console after making a change to the DAW layer options.Finding the Console on the AWS Remote ApplicationLaunch AWS Remote on your workstation. If you only have one AWS console on the network, AWS Remote willautomatically locate the console and the message ‘AWS 948-924 SN xxxxx is online’ (where xxxxx is the ID of theconsole) will be shown in green text in the bottom left hand corner of the browser:If you have multiple AWS consoles on the network or the AWS Remote browser did not automatically locate your console‘No AWS 924-948 connected’ will be shown in red text. In this instance, click on the find icon . If the list is empty,click on Find, select the console you wish to connect to and click on select.If your console does not appear in the list, it suggests you have a network related issue. Please follow the steps in thenetwork trouble shooting section at the end of this document to resolve the issue.Once you have made this selection, the AWS Remote will automatically connect to the selected console and display the‘AWS 948-924 SN xxxxx is online’ message. To connect to a different console, click on the find icon andchange your selection.Page 1-12AWS 924-948 Owner’s Manual