11.07.2015 Views

AWS 924-948 - Solid State Logic

AWS 924-948 - Solid State Logic

AWS 924-948 - Solid State Logic

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Analogue OperationsCENTRE SECTIONIntroductionThe console’s centre section is used to control the console busses, dynamics, monitoring and overall configuration. It alsoprovides access to a number of DAW control elements which are covered in Section 4.Power Supply IndicatorsBeneath the VU meters, on the main control surface, you will find a row of four LEDs that display the current state of powerrails within the console. The ±15 Volt and the +4 Volt supplies are for analogue audio and logic circuitry respectively. The+12 Volt supply provides power for the faders and some relays. All LEDs should be lit whenever the console is poweredup. If any are unlit, please call your technical department! If you don’t have one, please refer to the maintenance informationin the appendices of this manual.Function KeysA number of console elements are configured using the Function keys, locatedin the top right quarter of the monitor panel. The top row of buttons assign asubset of softkeys to the lower row of buttons. The display indicates thefunction assigned to the lower row. Frequently, the lower softkeys are alsosubmenus, opening up a further set of softkeys in the lower row of buttons.When none of the upper row of keys are selected, the following functions are applied to the lower softkeys:ALLSET0dBActivates the SEL key on all channel strips.Groups the controls of all channels with their SEL key activated. With SET enabled, pressing any momentaryswitch on any selected channel will cause the switch action to be replicated across all selected channels.Sets selected faders to 0dBEFXC<strong>AWS</strong> <strong>924</strong>(Only available when EFX is active) Switchesthe channel’s EFX send from the Track busto the Channel output. The DIRECTPRE/EFX LED in the channel strip lightsgreen to indicate that the channel output hasbeen assigned to the EFX.<strong>AWS</strong> <strong>948</strong>TRKSTLNSLToggles all selected channels between In-Line Mix and In-Line Track mode.Toggles all selected channels between monoand stereo configuration.Links the solo-in-place functions of the twochannel paths in In-line modes.<strong>AWS</strong> <strong>924</strong>-<strong>948</strong> Owner’s Manual Page 3-15

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!