AWS 924-948 - Solid State Logic

DAW ControlChannel FunctionsIn DAW focus mode the channel meters, faders and part or all of the Solo and Cuts tile control the DAW and display itsstatus.33 34DAW MetersWhen in DAW focus mode, the 24 stereo channel meters indicate the level of the DAWsignal path. Mono tracks are displayed on the left meter only. When a signal reaches 0dBFs,the corresponding OVER tallyclipped.32will light to indicate that the DAW signal level hasThese meters duplicate the function of meters within your DAW, and show the sameinformation. The meters also follow DAW pre or post fader meter settings, as set withinthe DAW.OVER tallies can be reset using the F1 function in the Fkys softkey menu303231Status IndicatorsThe meter shows the status of the corresponding DAW track.3334REC30flashes when the track is in record ready and lights when the track is in record.EDIT31indicates that the track is selected for editing with the plug-in controller.Multi-channel Metering (TDM Systems Only)Multi-channel metering can be displayed by pressing OPTION + SOLO on a selected multi-channel track. The next twostereo meters are used to show the additional information. Normal metering functionality resumes after deselecting the Solofunction.Channel FaderThe channel fader can control any virtual DAW fader including Channel, Master, AuxiliaryMIDI tracks or Instrument tracks. The calibration of the fader will depend upon the DAW(please refer to your DAW manual for more details). Pressing ALT will display the gain ofthe DAW fader on the fader scribble strip when you move the fader.Fader GroupingChannel faders will follow any grouping enabled within your DAW. Faders can be disengagedfrom a fader group simply by holding down the CTRL button or by touching one fader ina group while adjusting another fader’s level. Relative fader levels are maintained uponrelease of the fader.AWS 924-948 Owner’s Manual Page 4-11