AWS 924-948 - Solid State Logic

DAW ControlADDITIONAL HUI DISPLAYSTimecode/Bars & Beats/Samples DisplayThe on-screen time readout can be assigned to display either Timecode (SMPTE/EBU), Feet/Frames, Bars/Beats or samples.This display will follow the setting selection made within your DAW. Please refer to your DAW manual for further details.DAW Status DisplayTo the left of the timecode display is the DAW status display. This shows the following flags:Solo DAW has a Solo activeLoop DAW has Loop enabledQPunch DAW has QuickPunch selectedPre DAW transport has pre-roll enabledPost DAW transport has post-roll enabledSolo DAW has a Solo activeAudition DAW is in Audition mode. This is displayed in place of the Pre and Post flagsSoft Key DisplayThe Plug-In Editor includes an 8x8 matrix of soft buttons which map to the 16boxes at the bottom of the plug-in display:The top row (buttons 1-8) allow selection of the labelled function. Oncepressed, a sub-menu will appear for the second row of soft key buttons (9-16).The menus are ordered as follows:Soft Key Display1. Automation EnablesAutomation Enable modes (AuEn) globally engage or disengage automation for various items. See Page 4-29.2. Automation ModesAutomation Modes (AuMo) sets the update mode for each channel or group of channels. See Page 4-29.AWS 924-948 Owner’s Manual Page 4-25