AWS 924-948 - Solid State Logic

AutomationPRO TOOLS SETUP NOTESTo enable timecode generation, click on the GEN MTC button in the transport window:Now open the Synchronisation tab in the Setup/Peripherals window and select the port on the MIDI interface that isconnected to AWS Port 4 MIDI IN or IP MIDI Port 7. Also select the timecode rate for the session and the session starttime. It is expedient to make a note of the timecode standard that was used for a particular AWS mixing project. Automationautomatically detects the timecode standard from the incoming MTC messages. It will quite happily attempt to play outstored mix data to incoming timecode with a different frame rate, but this will result in small but potentially annoying timingerrors in automation playback.AWS 924-948 Operator’s Manual Page 7-17