AWS 924-948 - Solid State Logic

Setup Guide: Console ConfigWORKING WITH PROJECTS AND TITLESAt least one Project and Title must be present before you can store an automated Mix. Select SSL followed by Proj. Nowselect New Proj and the system will create a new Project and Title; logically these will be named Project 1 and Title 1 (ifno previous projects exist).If Projects have been previously created, when you press the Proj key, the screen will display a list of existing Projects. Usethe left-hand encoder to scroll through the list and when you find the Project you require, press the encoder switch (orsoft key below the encoder) that represents the Select function. This makes that Project current (as indicated by the entrybeing highlighted in yellow, with the word selected after its name) and reveals the Titles in that Project. To create a newTitle in a Project, select New Title. Titles and Projects are automatically numbered in sequence of creation. Select CopyTitle to copy the selected Title.Note that the top line of the display always indicates the current Project and current Title. Use the Select rotary controlto scroll through lists of Projects, Titles, etc., and the encoder switch to select them. To return at any time to the Projectlist, press the Back softkey.AWS 948 TRANSFER COMPATABILITYNote that when loading Titles created on a 900 or 924 onto a 948, the automation is applied to both sides of a stereochannel. In In-Line modes, automation is applied to the primary channel path, and the secondary channel path drops intoManual.Page 7-2AWS 924-948 Operator’s Manual