ISDN Protocol Administrator's and Developer's Guide ... - Intervoice

Defining the ISDNTKIT Toolkit SubroutinesThe parameters included on theSET_AND_SEND_REDIRECTION_NUMBER_ELEMENT form aredescribed in Table 4-46.Table 4-46. SET_AND_SEND_REDIRECTION_NUMBER_ELEMENT ParametersNumber Parameter Required Type Description1 Line Number Yes Integer Identifies the application oroutbound line number if connect.dllis being used and this elementshould be included in the Setupmessage.2 Which Message Yes Integer Identifies the type of message inwhich the SET_AND_SEND_REDIRECTION_NUMBER_ELEMENT will be included.Valid range and types:• 0 – Do Not Send This Message• 1 – Setup Message• 2 – Disconnect Message• 3 – Facility Message3 Type of Number Yes Integer Identifies the number type that isincluded in SET_AND_SEND_REDIRECTION_NUMBER_ELEMENT.Valid range and types:• 0 – Unknown• 1 – International (Call fromoutside the immediate country)• 2 – National (Country-specificdomestic call)• 4 – Subscriber4 Numbering Plan Yes Integer Identifies the numbering plan that isincluded in SET_AND_SEND_REDIRECTION_NUMBER_ELEMENT.Valid range and types:• 0 – Unknown Numbering Plan• 1 – ISDN/Telephony NumberingPlan• 9– Private Numbering Plan60001262, First Edition Common Subroutines for the ISDN Toolkit 4-85