ISDN Protocol Administrator's and Developer's Guide ... - Intervoice

Table 10-4. VN4_TRANSFER_START Return Values (continued)ValueDescription-604 Unknown internal transfer attempt errorVN4_GET_XFER_RESULT-650 A received Post Card timed out in the toolkit call.-651 The Post Card received was not for the TelephonyServices Gateway.-652 Bad Cross Reference Value on received Post Card.-653 A Facility Reject message from the network wasreceived for a Transfer request.-654 Timed out waiting on Facility Acknowledge fromthe network for a Transfer request.VN4_HOLD_RETURN-700 Received Post Card timed out in toolkit call.-701 The Post Card received was not for the TelephonyServices Gateway.-702 HhLineXlate Internal Protocol Error-703 Inbound caller disconnected-704 Unknown internal Hold Return errorResults:• SUCCESS – If the transfer is successful, the caller is transferred andthe lines are released. The transaction completes and starts again.• FAILURE – If the transfer fails, an error code is returned. BecauseVN4_TRANSFER_START calls many functions inside isdntkit.lib,each of these functions can return an error if one is detected. SeeTable 10-4 on page 10-8 for breakdowns of each type of error.The VN4_TRANSFER_START function requires that your system have acstatadv.dll file that is dated later than August 1, 2003. The .dll is locatedin the appl\dll directory in the InterSoft runtime environment.The cstatadv.dll file was modified to allow a different return codebetween an outbound line ringing and a timeout in the GETSTATUSfunction inside the .dll. The function changes are internal to the toolkit,but the .dll must be later than the required date.10-10 ISDN Protocol Administrator’s and Developer’s Guide 60001262, First Edition