ISDN Protocol Administrator's and Developer's Guide ... - Intervoice

Field DescriptionsThe UserSubroutineCall form fields are described below.Required, Optional, and Read-only FieldsEach field description indicates if the field is required,optional, or read-only, as follows:•Required indicates that an entry (or acceptance of thedefault entry) is necessary for the form to be completeand functional. Although it may be possible to save theform, the form is outlined in red on the call flowdiagram. In this state, you cannot test the form orexport the application.Typically, required form fields are white.•Optional indicates that no entry is necessary (the fieldcan be blank) for the form to be functional.Typically, optional form fields are blue.• Read-only indicates that you cannot change the fieldon the form, although you may be able to change thefield by modifying another form.Typically, read-only form fields are gray.SubroutineRequired. Click the arrow button to display a list of subroutinesavailable for this toolkit. Choose the name of the subroutine youwant to call.Form Name ExtensionOptional. Enter an identifier to add to the end of theUserSubroutineCall form label.In the call flow, the form name extension you enter hereimmediately follows the UserSubroutineCall form label in theformat _FormNameExtension, where FormNameExtension is theidentifier you entered.Subroutine CommentsRead-only. Displays comments (such as a brief description) aboutthe subroutine that were entered on the subroutine’sSubroutineEntry form.4-6 ISDN Protocol Administrator’s and Developer’s Guide 60001262, First Edition