ISDN Protocol Administrator's and Developer's Guide ... - Intervoice

[EncodingType]; Optional Parameter:; Determines encoding standard for Facility; Messages sent to the switch and decoding of; Facility Messaged received.; Default is OBJECT. Set To OBJECT For Single Step; Transfer.;; Valid Parameters are:; {OBJECT, INTEGER}[IsaVocalCard/D] ; VC/D Board Params1 ; Board #e1_chn.isa ; DSP1 Load File Name5 ; DSP1 Line Type Definition (1 - 6)0 ; DSP1 Allocate Voice Channels (0 = NO/;1= YES)0 ; DSP1 Allocate Conf Bridges (1-> 3wayCB,;2-> VarLenCB, 3-> 4wayCB)e1_chn.isa ; DSP2 Load File Name5 ; DSP2 Line Type Definition (1 - 6)0 ; DSP2 Allocate Voice Channels (0=NO/1=; YES)0 ; DSP2 Allocate Conf Bridges (1-> 3wayCB,; 2-> VarLenCB, 3-> 4wayCB)[IsaTelephonyProtocol]1 ; Board #1 ; Span # (1 / 2)PROTQSIG ; Span Protocol DLL name1 ; Future use (do not change from 1)1..30 ; Span Line List2 ; Span # (1 / 2)PROTQSIG ; Span Protocol DLL name1 ; Future use (do not change from 1)1..30 ; Span Line List[IsaLineConfig] ; VC/D Line Configuration Params1 ; Dial Type0 ; Answer Count70 70 ; Digit On Time, Digit Off Time500 ; HookFlash time0 ; Gain adjustment 1 -12..0..4 -12= 12db; of loss 4= 4db of gain0 ; Gain adjustment 2 -12..0..41 1 1 1..30 ; Board #, Span #, Line Type (1 (primary); or 3 (secondary) ), Line List1 2 1 1..30 ; Board #, Span #, Line Type (1 (primary); or 3 (secondary)), Line List[IsaLineGroup] ; VC/D Line Group Params1 ; Group number1 1 1 1..30 ; Board #, Span #, Line Type (1 (primary); or 3 (secondary)), Line List1 2 1 1..30 ; Board #, Span #, Line Type (1 (primary); or 3 (secondary)), Line List5-8 ISDN Protocol Administrator’s and Developer’s Guide 60001262, First Edition