ISDN Protocol Administrator's and Developer's Guide ... - Intervoice

Turning Off Logging and DebuggingTo turn off logging and debug the log information:1 From the ISDN Console window, press , then again tostop the logging.The ISDN Console window closes.2 From a command prompt, run rdisdn.exe.isdnlog.dat is the file that contains the raw ISDN data. The rdisdnutility converts the log data into an easy-to-read text file calledisdnlog.txt.3 Look for the rdisdn.txt file in the intv\dat directory.Configuring D Channel for DTE and DCEPress or tomove to other spans tochange theirconfigurations. Alwayspress to save thescreen before exiting.If the Omvia Media Server is required to function in DCE (datacommunications equipment) format, but the switches are DTE (datatermination equipment) format and cannot be changed, return to theISDN Console General menu and follow the steps below:1 At the General Menu, enter 1 to select System Configuration, andpress .2 At the System Configuration screen, enter 1 to select D ChannelConfiguration.3 Enter the number of the span to be configured.4 At the Link Level Configuration screen, use the arrow keys tonavigate the screen, and change the Frame Level Address from 0 to1.5 Press to save.6 Once all spans are configured and saved, press to hot updatethe settings.14-34 ISDN Protocol Administrator’s and Developer’s Guide 60001262, First Edition