- Page 1:
ISDN Protocol Administrator’s and
- Page 4 and 5:
Copyright 2003 Intervoice, Inc.ãAl
- Page 7 and 8:
Table of ContentsList of FiguresixL
- Page 9 and 10:
Common Subroutines for the ISDN Too
- Page 11 and 12:
Call Transfer .....................
- Page 13 and 14:
Siemens Cornet N ISDN Protocol 13-1
- Page 15:
List of FiguresFigure 2-1. Single-O
- Page 18 and 19:
Table 4-15. GET_CONNECTED_PRESENTAT
- Page 20 and 21:
Table 6-36. ISDN_DPNS_ACTIVATE_MWI
- Page 23 and 24:
About This DocumentPurpose and Audi
- Page 25 and 26:
Chapter 10—VN4 ISDN ProtocolDiscu
- Page 27 and 28:
Web SiteEntire Documentation SetInt
- Page 29 and 30:
InVisionGetting Started with InVisi
- Page 31 and 32:
AT&TThe AT&T specifications TR 5007
- Page 33 and 34:
British TelecomBritish Telecom spec
- Page 35 and 36:
ECMAEuropean Computer Manufacturers
- Page 37 and 38:
ConventionsThis document uses the f
- Page 39 and 40:
1In this chapter...▼ ISDN Overvie
- Page 41 and 42:
ISDN OverviewISDN Reference PointsR
- Page 43 and 44:
2In this chapter...▼ Information
- Page 45 and 46:
Information ElementsVariable-Length
- Page 47 and 48:
Information ElementsTable 2-2. Vari
- Page 49 and 50:
ISDN Message TypesCall InformationC
- Page 51 and 52:
ISDN Message TypesMiscellaneousMisc
- Page 53 and 54:
3In this chapter...▼ T1 Transfer
- Page 55 and 56:
T1 Transfer MethodsRelease Link Tru
- Page 57 and 58:
E1 Transfer MethodsE1 Transfer Meth
- Page 59 and 60:
E1 Transfer MethodsDPNSS 1 Call Tra
- Page 61 and 62:
E1 Transfer MethodsQSIG Path-Replac
- Page 63 and 64:
4In this chapter...▼ InVision Too
- Page 65 and 66:
InVision Toolkits OverviewEach tool
- Page 67 and 68:
Using the ISDNTKIT Toolkit Subrouti
- Page 69 and 70:
Using the ISDNTKIT Toolkit Subrouti
- Page 71 and 72:
Defining the ISDNTKIT Toolkit Subro
- Page 73 and 74:
Defining the ISDNTKIT Toolkit Subro
- Page 75 and 76:
Defining the ISDNTKIT Toolkit Subro
- Page 77 and 78:
Defining the ISDNTKIT Toolkit Subro
- Page 79 and 80:
Defining the ISDNTKIT Toolkit Subro
- Page 81:
Defining the ISDNTKIT Toolkit Subro
- Page 84 and 85:
Return Values:See Table 4-10.Table
- Page 86 and 87:
GET_CONNECTED_NUMBER_ALLUse the GET
- Page 88 and 89:
GET_CONNECTED_NUMBERING_PLANUse the
- Page 90 and 91:
GET_CONNECTED_PRESENTATION_INDICATO
- Page 92 and 93:
GET_CONNECTED_SCREENING_INDICATORUs
- Page 94 and 95:
GET_CONNECTED_TYPE_OF_NUMBERUse the
- Page 96 and 97:
GET_DISCONNECT_CAUSE_CODEThe last r
- Page 98 and 99:
Table 4-19. GET_DISCONNECT_CAUSE_CO
- Page 100 and 101:
GET_DNIS_ALLUse the GET_DNIS_ALL su
- Page 102 and 103:
GET_DNIS_NUMBERING_PLANUse the GET_
- Page 104 and 105:
GET_DNIS_TYPE_OF_NUMBERUse the GET_
- Page 106 and 107:
GET_ORIGINAL_CALLED_NUMBERUse the G
- Page 108 and 109:
GET_ORIGINAL_CALLED_NUMBER_ALLUse t
- Page 110 and 111:
Table 4-27. GET_ORIGINAL_CALLED_NUM
- Page 112 and 113:
Table 4-28 displays the numbering p
- Page 114 and 115:
Return Values:See Table 4-29.Table
- Page 116 and 117:
Return Values:See Table 4-30.Table
- Page 118 and 119:
Return Values:See Table 4-31.Table
- Page 120 and 121:
Return Values:See Table 4-32.Table
- Page 122 and 123:
Return Values:See Table 4-33.Table
- Page 124 and 125:
Return Values:See Table 4-34.Table
- Page 126 and 127:
GET_REDIRECTION_NUMBERING_PLANUse t
- Page 128 and 129:
GET_REDIRECTION_PRESENTATION_INDICA
- Page 130 and 131:
GET_REDIRECTION_REASONUse the GET_R
- Page 132 and 133:
GET_REDIRECTION_SCREENING_INDICATOR
- Page 134 and 135:
GET_REDIRECTION_TYPE_OF_NUMBERUse t
- Page 136 and 137:
GET_UUIUse the GET_UUI subroutine t
- Page 138 and 139:
SET_AND_SEND_CONNECTED_NUMBER_ELEME
- Page 140 and 141:
Table 4-42. SET_AND_SEND_CONNECTED_
- Page 142 and 143:
SET_AND_SEND_ORIGINAL_CALLED_NUMBER
- Page 144 and 145:
Table 4-44. SET_AND_SEND_ORIGINAL_C
- Page 146 and 147:
SET_AND_SEND_REDIRECTION_NUMBER_ELE
- Page 148 and 149:
Table 4-46. SET_AND_SEND_REDIRECTIO
- Page 150 and 151:
SET_AND_SEND_UUI_ELEMENTUse the SET
- Page 152 and 153:
Return Values:See Table 4-49.Table
- Page 154 and 155:
QSIG OverviewFor more information o
- Page 156 and 157:
Figure 5-2 displays the first part
- Page 158 and 159:
QSIG ConfigurationTable 5-1 lists t
- Page 160 and 161:
[EncodingType]; Optional Parameter:
- Page 162 and 163:
[EncodingType]Determines the coding
- Page 164 and 165:
QSIG Path Replace TransferThe Path
- Page 166 and 167:
ISDN_QSIG_HOLDUse the ISDN_QSIG_HOL
- Page 168 and 169:
ISDN_QSIG_STARTXFERThe ISDN_QSIG_ST
- Page 170 and 171:
ISDN_QSIG_SINGLE_STEP_XFERThe ISDN_
- Page 172 and 173:
Table 5-7. Single Step Transfer Err
- Page 174 and 175:
DPNSS 1 OverviewDPNSS 1 is primaril
- Page 176 and 177:
Table 6-1. DPNSS 1 Network Layer Me
- Page 178 and 179:
Extension Status (BTNR 188 Section
- Page 180 and 181:
DPNSS 1 Network StructureDPNSS 1 re
- Page 182 and 183:
Table 6-3 displays the Supplementar
- Page 184 and 185:
Table 6-3. Supplementary Informatio
- Page 186 and 187:
DPNSS 1 ConfigurationTable 6-4 list
- Page 188 and 189:
0 ; Gain adjustment 2 -12..0..41 1
- Page 190 and 191:
Optional EntriesOptional configurat
- Page 192 and 193:
Table 6-5. Alphabetical List of DPN
- Page 194 and 195:
ISDN_DPNS_GET_ANIUse the ISDN_DPNS_
- Page 196 and 197:
Return Values:See Table 6-8.Table 6
- Page 198 and 199:
ISDN_DPNS_GET_DNISUse the ISDN_DPNS
- Page 200 and 201:
Return Values:See Table 6-11.Table
- Page 202 and 203:
ISDN_DPNS_AUTO_OPT_ENQUse the ISDN_
- Page 204 and 205:
Return Values:See Table 6-13.Table
- Page 206 and 207:
A sample UserSubroutineCall form th
- Page 208 and 209:
Sample MessagesTwo EEMC and possibl
- Page 210 and 211:
Return Values:See Table 6-16.Table
- Page 212 and 213:
Parameters:See Table 6-17.Table 6-1
- Page 214 and 215:
ISDN_DPNS_GET_DIVERSION_INFOUse the
- Page 216 and 217:
ISDN_DPNS_ACTIVATE_CONTROLLED_DIVER
- Page 218 and 219:
ISDN_DPNS_DEACTIVATE_CONTROLLED_DIV
- Page 220 and 221:
ISDN_DPNS_GET_CONTROLLED_DIVERSIONU
- Page 222 and 223:
Call TransferCall transfer is the p
- Page 224 and 225:
Return Values:See Table 6-25.Table
- Page 226 and 227:
Parameters:See Table 6-26.Table 6-2
- Page 228 and 229:
Executive IntrusionExecutive intrus
- Page 230 and 231:
Return Values:See Table 6-29.Table
- Page 232 and 233:
Sample MessagesSome typical ISRMC m
- Page 234 and 235:
ISDN_DPNS_GET_L3STATE_TXTUse the IS
- Page 236 and 237:
ISDN_DPNS_GET_L3_STATEUse the ISDN_
- Page 238 and 239: Message Waiting IndicatorA Message
- Page 240 and 241: Parameters:See Table 6-36.Table 6-3
- Page 242 and 243: Return Values:See Table 6-39.Table
- Page 244 and 245: ISDN_DPNS_GET_ASCII_MESSAGEUse the
- Page 246 and 247: Service Indicator CodeThe Service I
- Page 248 and 249: Return Values:See Table 6-43.Table
- Page 250 and 251: Calling/Called Line Category (CLC)T
- Page 252 and 253: ISDN_DPNS_SET_CLCUse the ISDN_DPNS_
- Page 255 and 256: 7In this chapter...▼ EU4 Overview
- Page 257 and 258: Euro-ISDN ConfigurationDefining int
- Page 259 and 260: Euro-ISDN ConfigurationOptional Ent
- Page 261 and 262: Defining the EU4 SubroutinesParamet
- Page 263 and 264: Defining the EU4 SubroutinesTable 7
- Page 265 and 266: Defining the EU4 SubroutinesReturn
- Page 267 and 268: Defining the EU4 SubroutinesReturn
- Page 269: Defining the EU4 SubroutinesReturn
- Page 272 and 273: AT&T OverviewThe AT&T Custom ISDN w
- Page 274 and 275: Required EntriesThe required entrie
- Page 276 and 277: Required EntriesThe intvconf.dat en
- Page 278 and 279: Optional EntriesThe optional entrie
- Page 280 and 281: Parameters:See Table 8-2.Table 8-2.
- Page 282 and 283: Return Values:See Table 8-5.Table 8
- Page 284 and 285: Hicom OverviewThe Hicom ISDN protoc
- Page 286 and 287: Required EntriesThe required entrie
- Page 290 and 291: VN4 OverviewVN4 ConfigurationVN4 is
- Page 292 and 293: Defining the VN4 SubroutinesVN4_TRA
- Page 294 and 295: Table 10-2. VN4_TRANSFER_START Para
- Page 296 and 297: Table 10-4. VN4_TRANSFER_START Retu
- Page 298 and 299: Table 10-4. VN4_TRANSFER_START Retu
- Page 300 and 301: Nortel DMS OverviewNortel DMS Confi
- Page 302 and 303: Required EntriesThe required entrie
- Page 304 and 305: Defining the DMS SubroutinesISDN_DM
- Page 306 and 307: Return Values:See Table 11-3.Table
- Page 308 and 309: Parameters:See Table 11-4.Table 11-
- Page 310 and 311: Return Values:See Table 11-7.Table
- Page 312 and 313: Return Values:See Table 11-9.Table
- Page 314 and 315: National ISDN-2 OverviewNational IS
- Page 316 and 317: Required EntriesThe required entrie
- Page 318 and 319: Table 12-2 shows a list of valid nu
- Page 320 and 321: Parameters:See Table 12-3 on page 1
- Page 322 and 323: Siemens Cornet N OverviewCornet N i
- Page 324 and 325: .dat ExtensionVerify that the file
- Page 326 and 327: [VC/DFraming]1 ; Board #1 ; Span #2
- Page 328 and 329: ISDN Console OverviewISDN Console i
- Page 330 and 331: The General Menu screen appears.5 P
- Page 332 and 333: D ChannelConfigurationTo configure
- Page 334 and 335: T303Starts upon the sending of a Se
- Page 336 and 337: T444Starts after the receipt of a D
- Page 338 and 339:
Auto Connect On SetupIndicates that
- Page 340 and 341:
REJIndicates the number of times a
- Page 342 and 343:
Layer 3 StatisticsThe Layer 3 Stati
- Page 344 and 345:
Restart AckIndicates the number of
- Page 346 and 347:
Display Trace EnableEnables logging
- Page 348 and 349:
StateIndicates the Layer 3 state in
- Page 350 and 351:
The B Channel Access screen appears
- Page 352 and 353:
Operator FunctionsThe Operator Func
- Page 354 and 355:
Establishing Synchronization with H
- Page 356 and 357:
Lack of SynchronizationIf no synchr
- Page 358 and 359:
Enabling Logging for ISDNTo enable
- Page 360 and 361:
Turning Off Logging and DebuggingTo
- Page 362 and 363:
Establishing Layer Three LinkOnce t
- Page 364 and 365:
DebuggingThe ISDN Console I/O Log D
- Page 366 and 367:
Identifying ANI and DNIS in the Set
- Page 368 and 369:
ISDN Cause Code ValuesTable 14-10 b
- Page 371 and 372:
AIn this appendix...▼ StandardCon
- Page 373:
Standard ConfigurationAnalogThe sam
- Page 376 and 377:
Country-Specific EntriesTable B-1 b
- Page 379 and 380:
CIn this appendix...▼ Sample InVi
- Page 381 and 382:
Logppl.logt: Databasehone Lineate a
- Page 383 and 384:
get_second_line_and_dialDLL Name: C
- Page 385 and 386:
CaseChkStatusCalculate: returnCodeR
- Page 387 and 388:
FER_ARTXFERutineEntry willy Message
- Page 389 and 390:
MAIN July 25, 2003 Final2A
- Page 391 and 392:
MAIN July 25, 2003 Final2C
- Page 393 and 394:
Log Date and TimeLog:'>>> callStatu
- Page 395 and 396:
ISDN_QSIG_HOLD_RETURN_Call: ISDN_QS
- Page 397 and 398:
MAIN July 25, 2003 Final2I
- Page 399 and 400:
MAIN July 25, 2003 Final3B
- Page 401 and 402:
MAIN July 25, 2003 Final3D
- Page 403 and 404:
eTERCEPT==>>ORDER==>>CANTCodering)u
- Page 405 and 406:
MAIN July 25, 2003 Final3H
- Page 407 and 408:
Test_SingleStep_XferBErrorDuration:
- Page 409 and 410:
MAIN July 25, 2003 Final4C
- Page 411 and 412:
gypFile: appl.logFormat: DatabaseLo
- Page 413 and 414:
MAIN July 25, 2003 Final4G
- Page 415 and 416:
MAIN July 25, 2003 Final4I
- Page 417 and 418:
MAIN July 25, 2003 Final5B
- Page 419 and 420:
MAIN July 25, 2003 Final5D
- Page 421 and 422:
MAIN July 25, 2003 Final5F
- Page 423 and 424:
MAIN July 25, 2003 Final5H
- Page 425 and 426:
Glossaryµ-law (pronounced mu-law)A
- Page 427 and 428:
compandingA transmission procedure
- Page 429 and 430:
Euro-ISDNOne type of ISDN. It is ba
- Page 431 and 432:
ISO (International Organization for
- Page 433 and 434:
signalingThe transmission of electr
- Page 435:
winkA supervisory signal generated
- Page 438 and 439:
AT&T xxv4ESS switches 8-65ESS switc
- Page 440 and 441:
Explicit Call Transfer (ECT) 3-5[RE
- Page 442 and 443:
InVisionapplication, ASYNC leg 5-12
- Page 444 and 445:
ISDNTKIT toolkit 4-2calling subrout
- Page 446 and 447:
loop start, defined Glossary-7Mmess
- Page 448 and 449:
GET_ORIGINAL_CALLED_NUMBERING_PLAN
- Page 450:
VN4_TRANSFER_START subroutine 10-4,