ISDN Protocol Administrator's and Developer's Guide ... - Intervoice

DPNSS 1 Configuration.dat ExtensionVerify that the file is saved with the .dat extension. Sometext editors automatically attach a .txt extension, so thename of the saved file becomes intvconf.dat.txt. Beforeusing the file, rename it intvconf.dat.Below is an example of an intvconf.dat file that is configured for DPNSS1.[IsaBoard]1 ;Board NumberIsaVocalCard/D ;Board Description ID String2345 ;Serial Number (NON PNP - Not Used)0 ;Base Segment (PNP - Not Used)0 ;Base IO (PNP - Not Used)0 ;IRQ Level (PNP - Not Used)0 ;DMA Level (PNP - Not Used)[VocalCard/D] ; VC/D Board Params1 ; Board #e1_unk.isa ; DSP1 Load File Name5 ; DSP1 Line Type Definition (1 - 6)0 ; DSP1 Allocate Voice Channels (0 = NO/;1= YES)0 ; DSP1 Allocate Conf Bridges (1-> 3wayCB,;2-> VarLenCB, 3-> 4wayCB)e1_unk.isa ; DSP2 Load File Name5 ; DSP2 Line Type Definition (1 - 6)0 ; DSP2 Allocate Voice Channels (0=NO/1=; YES)0 ; DSP2 Allocate Conf Bridges (1-> 3wayCB,; 2-> VarLenCB, 3-> 4wayCB)[TelephonyProtocol]1 ; Board #1 ; Span # (1 / 2)PROTDPNS; Span Protocol DLL name1 ; Future use (do not change from 1)1..30 ; Span Line List2 ; Span # (1 / 2)PROTDPNS ; Span Protocol DLL name1 ; Future use (do not change from 1)1..30 ; Span Line List[IsaLineConfig] ; VC/D Line Configuration Params1 ; Dial Type0 ; Answer Count70 70 ; Digit On Time, Digit Off Time500 ; HookFlash time0 ; Gain adjustment 1 -12..0..4 -12= 12db; of loss 4= 4db of gain60001262, First Edition DPNSS 1 Protocol 6-15