ISDN Protocol Administrator's and Developer's Guide ... - Intervoice

Table 10-4. VN4_TRANSFER_START Return ValuesValueDescription127 Transfer – Ring Tone or Ring Event detected.129 Transfer Failed – Time Out130 Transfer Failed – Busy131 Transfer Failed – Reorder132 Transfer or Fail – Answering MachineNote Transfer or Fail depends if AnsweringMachine Detection is enabled.133 Transfer – Call Answered134 Transfer Failed – Modem135 Transfer Failed – Unknown Cadence136 Transfer Failed – Pre-First Ringback Timeout137 Transfer Failed – Post Ringback Timeout138 Transfer Failed – Intercept SIT139 Transfer Failed – Reorder SIT140 Transfer Failed – Vacant Code SIT141 Transfer Failed – No Circuit SIT-350 Telephone Line Passed to Toolkit was not valid.(The number was less than 1 or greater than 192.)-351 The Telephone Line Number passed for the transferhad an invalid length. (The length was less than 1 orwas not a string.VN4_GET_CONNECT_INIT_STATE-400 The received Post Card timed out in the toolkit call.-401 The Post Card that was received was not for theTelephony Services Gateway.-402 Bad cross reference return value on received PostCard.-403 Inbound call never reached the connected statewhen the transfer was attempted.-405 HhLineXlate Internal Protocol Error10-8 ISDN Protocol Administrator’s and Developer’s Guide 60001262, First Edition