ISDN Protocol Administrator's and Developer's Guide ... - Intervoice

0 ; Gain adjustment 2 -12..0..41 1 1 1..30 ; Board #, Span #, Line Type (1 (primary); or 3 (secondary)), Line List1 2 1 1..30 ; Board #, Span #, Line Type (1 (primary); or 3 (secondary)), Line List[IsaLineGroup] ; VC/D Line Group Params1 ; Group number1 1 1 1..30 ; Board #, Span #, Line Type (1 (primary); or 3 (secondary)), Line List1 2 1 1..30 ; Board #, Span #, Line Type (1 (primary); or 3 (secondary)), Line List[ISDNSwitchType]DPN[ISDN]DPNSL2 DPNSL2Initialize; Layer 2 init function.[DPNSS_Span]0 0 ; Span(zero relative); DPNSS Logical End assignment 0=A, 1=B[DPNSS_Span]1 0 ; Span(zero relative); DPNSS Logical End assignment 0=A, 1=BRequired EntriesThe required intvconf.dat entries for DPNSS 1 include:For more information onthe British Telecomstandards for DPNSS 1,see BTNR 188 – DigitalPrivate Signalling SystemNo 1 (DPNSS 1) or BTNR189 – InternetworkingBetween DPNSS1 andOther Signalling Systems.[VocalCard/D]; VC/D Board Params1 ; Board #E1_UNK.ISA; DSP1 Load File Name5 ; DSP1 Line Type Definition (1 - 6)0 ; DSP1 Allocate Voice Channels (0 = NO / 1= YES)0 ; DSP1 Allocate Conf Bridges (1=3wayCB, 2=VarLenCB,3=4wayCB)E1_UNK.ISA; DSP2 Load File Name5 ; DSP2 Line Type Definition (1 - 6)0 ; DSP2 Allocate Voice Channels (0 = NO / 1= YES)0 ; DSP2 Allocate Conf Bridges (1-> 3wayCB, 2->VarLenCB, 3-> 4wayCB)[TelephonyProtocol]1 ; board number1 ; span numberPROTDPNS; Span 1 Protocol DLL name1 ; Span 1 primary/secondary1..30 ; Span 1 line list2 ; span numberPROTDPNS; Span 2 Protocol DLL name1 ; Span 2 primary/secondary1..30 ; Span 2 line list[ISDNSwitchType]DPN6-16 ISDN Protocol Administrator’s and Developer’s Guide 60001262, First Edition