Clamping Tools - EN / Hahn+Kolb

Magnetic clamping technologyMagnetic clamping accessoriesContinued next pageElectro-permanent magnetic clamping plates and round chucksfor chip-removing machiningExecution:•clamping system with NdFeB high-energy magnets and extremely high adhesive force•magnetic system with high depth effect bridges larger air gaps•solid, extremely stable mono-block design•pole gap protected against wear by brass•degree of protection IP65Accessories:•fixed pole block 40 x 50 x 55 mm•moveable pole block 40 x 50 x 53/58 mmElectro-permanent magnet clamping plates with 27,5 mm transverse pole pitch•milling of thin plates•min. thickness of the work piece: 5-8 mm•min dimensions of the work piece: 95 x 95 mm•nominal adhesive force: 110 N/cm 2Electro-permanent magnet clamping plates with 55 mm transverse pole pitch•for heavy milling•min. thickness of the work piece: 20 mm•min dimensions of the work piece: 95 x 95 mm•nominal adhesive force: 150 N/cm 2Model EP 27,5 EP 55Length mm 630 630 1015 590 810 1030Width mm 300 400 500 300 400 500Height 80 80 80 97 97 97Height h mm 69 69 111 44 75 133Wearing height mm 8 8 8 8 8 8Weight Kg 107 143 285 116 212 337Control unit (400 V / 50 Hz) 30x2 30x4 30x4 30 30 30x2h Adhering-power setting, control device for installation, pole blocks, adapter, pole strips and other sizes available on request.Metal-cutting toolsContinued next pageSwitch and control apparatusElectronic commutation control devices with integrated microcomputer and adhering force setting.Execution:Execution:•small and compact•LCD plain text display•accident prevention regulation VBG7n6•machine guidelines 2004/42/EG•Low Voltage Directive 93/86/EC•EMC Directive 2004/108/ECfor electro-permanent magnet clamping platesh Additional information, advice and quotations available on request.t Technical Hotline +49 (0)711 9813-360for electromagnet clamping platesContinued next pagePermanent-magnet magnetic clamping blockswith 4 magnetic clamping surfacesApplication: for flat, angular, co-ordinate and profile grinding, countersinking and wire EDM, measuringand testing.Execution:•firm clamping for small and thin parts •magnetic field height approx. 2 mm•sealed to prevent fluid penetration •can be reground on all 4 sides up to the height of the two frontpanelsIdent. No. 030 stainless version with high alloy chromium steel poles for use on wire EDM. Less suitablefor grinding as stainless finish has reduced adhesive force.Note: We recommend to use the clamping blocks with a hardened and ground limit stop. Four M 5 threadsfor attachment are available on the front face.Length A mm 175 195Length L mm 115 135Width x height (WxH) mm 64 x 64 64 x 64Pole pitch St/Nf mm 2/2 2/224355 Ident. No. 010 020Unit price E O. R. O. R.HPL24355 Stainless execution Ident. No. 030 –Unit price E (O. R.) –BAh Clamping blocks with sine plate support on request. Prod. Gr. 2652011/12587