Clamping Tools - EN / Hahn+Kolb

Conventional workpiece clampingMechanical clamping elementsMetal-cutting toolsContinued next pageCrocodile clamping brackets with counter holderDesign: tempered, galvanized and with captive thrust piece and counter holder.Application: The crocodile is used for all clamping tasks in which clamping is done via T-slots and threadedboreholes. The pressure element is captively connected to the clamping claw which make the crocodileready to use fast and flexibly. Heights can be quickly overcome and the propping of the clamping claw doesnot represent any problem.Advantages:•variable and quick adjustability•The clamping bracket no longer has to be precisely bedded and brought to the height of the work piece,because the brackets can compensate for a clamping height of up to 100 mm.•Application in all fields of chip-removing and non-cutting machining•Thrust piece and counter-holder are connected with the clamping claw in a captive manner.•particularly suitable for use on injection moulding machines and presses•the clamping height is variably adjustable with accessories•infinitely variable adjusting of the clamping heightSize 1 2 3 4For T-slot sizes mm 10/12/14 12/14/16/20 16/18/20/22 20/22/24/28Clamping force kN 30 40 60 75Dimension H1 mm 0-55 0-70 0-80 0-100Claw width mm 44 55 62 70Claw length mm 115 150 187 235Claw height A mm 27 36 42 51Brackets nose dimension A1 17 21 27 34Ø B1 mm 13 17 21 2526224 Ident. No. 010 020 030 040Unit price E O. R. O. R. O. R. O. R.K E1Prod. Gr. 260A1AH1Continued next pageSupport extensions for crocodile clamping bracketApplication: The supporting extension is screwed onto the counter holder of the crocodile in order toextend the clamping height.Screw x Length LS mm M10 x 39 M12 x 49 M12 x 94 M16 x 55 M16 x 90 M20 x 69 M20 x 109Dimension C mm 30 42 42 50 50 50 50Dimension D1 mm 30 36 36 42 42 50 50Dimension e mm 44 54 54 60 60 70 70Dimension k mm 8 10 10 13 13 16 1626224 Ident. No. 100 110 120 130 140 150 160Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R.Prod. Gr. 260DGGA LSCHD1KBEContinued next pageStepped bracketsmade of special cast iron, for table slots 14 mmTensioning screw with threaded bush of hardened and tempered steel, tensile strength class 8.8This stepped clamp is quickly ready to use as a clamping unit. The fine gradation of the interlocking stepsfacilitates fast adjustment to the height of any workpiece up to approx. 195 mm. Due to the compact construction,the stepped jaw does not require much space on the machine bed.For clamping height mm 0-45 15-45 30-75 60-135 120-195Step height mm 0,75 0,75 1,25 2,5 2,526233 Ident. No. 005 010 020 030 040Unit price E O. R. O. R. O. R. O. R. O. R.h Stepped clamps for table slot 12, 16 and 18 mm on request. Prod. Gr. 260598 2011/12