Clamping Tools - EN / Hahn+Kolb

Positioning elementsParallel supportsContinued next pageClamping bolt system SBSApplication: quick, reliable, collision-free clamping of both small and large workpieces for complete accessibility.Clamping procedure: screw the thread bolt 1 into the workpiece. Screw on the union nut, 2 rest theworkpiece on supports (min. support height 350 mm). Position the clamping system SBS 3-5 and clamptightly.The workpiece can be positioned extremely quickly using the four slot rails 4 5 (these are pushed in onthe machine table). No further attention has to be paid to the T-slots in the table.Advantages:•complete accessibility for machining on 5 sides•collision-free positioning the tools•the same clamping points on the workpiece are used irrespective of the T-slot table•complete flexibility from the T-slot rails on the machine table•direct transfer of the clamping forces•set-up times can be halved by using the thread already available for fastening•extremely quick and flexible clamping and releasing•space-saving system•one-man operationScope of delivery for basic set:4 1x T-slot rail (including holes for all common table slot widths), 2 1 x union nut (with 2 brass bushesand knurled), 3 threaded bolts R-L (for the T-slot rail) with T-slot nut rhombusImportant: The following items are needed as well: 1 Threaded bolts (for the component),5 1 x set of T-slot nuts for the T-slot rail (same size as the slots in the machine table)12345Metal-cutting toolsExample of applicationDesignation Basic set Threaded bolts 1 T-slot nut 5Size – M 10 M 12 M 16 M 20 M 24 14 16 18 20 2226248 Ident. No. 100 011 012 013 014 015 021 022 023 024 025Unit price E – O. R. O. R. O. R. O. R. O. R. – – – – –Price/pair E – – – – – – O. R. O. R. O. R. O. R. O. R.Set price E O. R. – – – – – – – – – –h Spare parts can be ordered any time. Prod. Gr. 280Continued next pageParallel piecessteel, case-hardened, finely ground in pairs and true-to-angleIn pairs, tolerance IT 5, nominal dimensions to DIN ISO 2768-1 tolerance group m.Application: can be used as bearing blocks, stops or distance pieces on machine tools, for machine vicesor marking plates for the parallel contact of workpieces. Due to the positive stepping the parallel piecesare also useful for marking. It is possible to lay two sizes on top of each other, and so many combinationsare possible. Several similarly aligned pairs are available on request.Height h mm 8 10 12 16 20 12 16 20Width b mm 2,5 3,2 4 5 6,3 4 5 6,3Length L mm 63 63 63 63 63 100 100 100Parallelism tolerance tp1 mm 0,006 0,006 0,008 0,008 0,009 0,008 0,008 0,009Parallelism tolerance tp2 mm 0,004 0,005 0,005 0,005 0,006 0,005 0,005 0,00626257 Ident. No. 208 210 212 216 220 312 316 320Price/pair E O. R. O. R. (O. R.) O. R. O. R. O. R. O. R. O. R.DIN 6346 PHeight h mm 25 32 40 25 32 40 50Width b mm 8 10 12 8 10 12 16Length L mm 100 100 100 160 160 160 160Parallelism tolerance tp1 mm 0,009 0,011 0,011 0,009 0,011 0,011 0,011Parallelism tolerance tp2 mm 0,006 0,006 0,008 0,006 0,006 0,008 0,00826257 Ident. No. 325 332 340 425 432 440 450Price/pair E O. R. O. R. (O. R.) O. R. (O. R.) O. R. (O. R.)Prod. Gr. 2602011/12613