Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Conventional workpiece clampingQuick-action clampsContinued next pagePush rod clampsfor compression and tension with small angular baseExecution: with long tie rod guide. Handle adjustable to any angle to the basic surface. The clamping fixturecan be fastened to tin plate without the angled base or can be screwed into the body of the device witha thread on the end face. Individual parts zinc plated, red, oil resistant plastic handle, case-hardened andgreased bearing bushes, stainless steel rivets.Delivery: with pressure screw and protective capSize 0 1 3Hole interval e mm 16 19,5 42Hole Ø d mm 4,5 4,5 6,5<strong>Clamping</strong> stroke mm 16 20 32Retention force F (compression and tension) approx. N 800 1000 2500<strong>Clamping</strong> height h (up to centre of screw) mm 12 15 25Angle base width (k) mm 25 30 60Total height x length (H x L) mm 46 x 96 60 x 121 96 x 190Pressure screw M 4 x 20 M 4 x 20 M 8 x 3526217 Ident. No. 005 010 030Unit price E O. R. O. R. O. R.Metal-cutting toolsh Other models available.Detailed brochure on request.Stainless steel (size 0 and 3) on request.Prod. Gr. 260Continued next pagePush rod clampsCompression and tension clamp – short modelExecution: with long tie rod guide, fastening thread and nut. Zinc plated and passivated. Stainless steelrivets. Dowel screws tempered. Bearing points greased. Ergonomic handle made of red, oil-resistantplastic.Application: the push rod clamp can be fastened to sheet steel walls, or screwed into body of the devicewith a thread on the end face. Besides, the flange fastening using angular base is possible.Delivery: with tempered, zinc-coated pressure screwSize 2 3 5Fastening screw k M 16x1,5 M 20x1,5 M 24x1,5<strong>Clamping</strong> stroke c mm 21 40 67Holding force F1 and F2 (pressure and tension) N 1000 2500 4000Tie rod Ø a mm 10 12 16Overall height x length mm 82 x 70 130 x 110 155 x 175Pressure screw M 6 x 25 M 8 x 35 M 12 x 5026218 Ident. No. 020 030 050Unit price E O. R. O. R. O. R.F11akF22h Stainless steel on request. Prod. Gr. 260Continued next pageStable angle basesApplication: for fastening the push rod clamp. Also for extending the application range by providing moreclamping height, and for installing in devices.Size 2 3 5Width A mm 60 65 70Height i mm 40 50 60Depth f mm 40 44 60Ø k mm 16,2 20,2 24,0Dimension H mm 24 33 37Dimension B mm 11 14,5 17Hole intervals c/g mm 18/40 19/41 32/45Drill Ø mm 6,7 6,7 926218 Ident. No. 520 530 550Unit price E O. R. O. R. O. R.h Stainless steel on request. Prod. Gr. 260ihkgdcbaIdent. No. 520fidhkgc fbaIdent. No. 530-5502011/12609
Change language