Clamping Tools - EN / Hahn+Kolb

Workpiece clampingPrecision vicesContinued next pageMechanical vicesoperated with hexagon socket keyApplication: for horizontal, vertical and lateral grinding, inspection and eroding jobs.Execution: alloyed tool steel, hardened, smoothed and polished. parallelism tolerance 0.005 mm/100 mm.Ident. No. 110-150 parallelism tolerance 0.002 mm/100 mmIdent. No. 010-030 parallelism tolerance 0.005 mm/100 mmOperation of the moving clamping jaw:Metal-cutting toolsNo. 28600 010-030 No. 28600 120 and 150 No. 28600 130 and 140Illustrations might be different.Version Type PLF with straining screw on upper side Type PL-S with quick adjustmentPrism ground inhorizontal horizontal horizontal horizontal horizontal horizontal horizontal horizontaland vertical and vertical and verticaland vertical and verticalJaw width mm 50 73 100 34 45 70 90 120Clamping width mm 62,5 100 125 25 50 80 120 150Jaw height mm 25 35 45 15 20 30 40 40Overall body height mm 50 67 90 35 45 62 80 90Body length mm 140 190 245 75 110 160 210 28028600 Ident. No. 010 020 030 110 120 130 140 150Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.i Selection overview vices page 617. Prod. Gr. 202Continued next pageMechanical vicesoperated with spindleApplication: for horizontal, vertical and lateral grinding and inspection jobs.Execution: alloyed tool steel, hardened and finely ground. Right-angle tolerance 0.005 mm/100 mm, parallelism tolerance 0.002 mm/100 mm.Jaw width mm 60 73 88Clamping width mm 55 100 125Jaw height mm 25 35 40Overall body length mm 110 210 25028604 Ident. No. 060 073 088Unit price E O. R. O. R. O. R.h Mini precision vices No. 47000 page 902i Selection overview vices page 617.Prod. Gr. 202Continued next pagePrecision sine bar machine vicesoperated with spindleApplication: for grinding and inspection jobsExecution: alloyed tool steel, hardened and finely ground. Right-angle tolerance 0.005 mm/100 mm,parallelism tolerance 0.002 mm/100 mm.Ident. No. 010-020 type PS-SVPrecise angular adjustment due to slip blocks (see from No. 32050 page 707).Setting range 0-46 degrees. Bearing and locating bolts hardened and ground with a tolerance of 0.001 mm.Ident. No. 100 type PS-ZD2-dimensional angular adjustment via 3' vernier.A fine setscrew on the lower body allows precise angular adjustment.Setting range 360° and 2 x 60°. The machine vices can be locked form-fit in any angle.Jaw width mm 70 90 70Clamping width mm 80 120 80Jaw height mm 30 40 30Overall height mm 93 113 137Overall body length mm 160 210 16028620 Ident. No. 010 020 100Unit price E O. R. (O. R.) O. R.i Selection overview vices page 617. Prod. Gr. 202Ident. No. 010-020Ident. No. 1002011/12619