Clamping Tools - EN / Hahn+Kolb

Lathe and rounding machine accessoriesLathe chucksContinued next pageTensioning spindles MZEfor inspection and light turning jobs for grinding and balancingApplication: for holding between points. A uniform cylindrical clamping is achieved with expanding sleeveslotted on both sides. The spindle 1 is case-hardened and ground, the sleeve 2 hardened and ground.– concentricity tolerance 0.01 mm.No. 22300 Sleeve tensioning jaws without clamping sleevesNo. 22301 Clamping sleeves, single1 2Clamping range mm 8-10,5 10-12,5 12-15 14-17 16-20 19-23Length L mm 75 110 125 140 150 17022300 Sleeve tensioning Ident. No. 001 005 010 020 030 040spindleUnit price E O. R. O. R. O. R. O. R. O. R. O. R.Socket mm 1,5 1,5 1,5 1,5 2 2 2 2 2 2 2Length E mm 40 40 45 45 60 60 70 70 70 80 80Ø D1 mm 8 9 10 11 12 13 14 15 16 19 2022301 Adapter sleeve Ident. No. 008 009 010 011 012 013 014 015 016 019 020Unit price E O. R. O. R. O. R. O. R. O. R. (O. R.) O. R. (O. R.) O. R. O. R. O. R.Clamping range mm 22-26 25-37 35-47Length L mm 175 225 22522300 Sleeve tensioningspindleIdent. No. 050 060 070Unit price E O. R. O. R. O. R.Socket mm 2 2 3 3 3 3 3 3 3 3Length E mm 80 80 100 100 100 100 100 100 100 100Ø D1 mm 22 24 25 26 28 30 32 35 38 4022301 Adapter sleeve Ident. No. 022 024 025 026 028 030 032 035 038 040Unit price E O. R. O. R. (O. R.) (O. R.) O. R. O. R. O. R. (O. R.) (O. R.) O. R.LEDMetal-cutting toolsh Clamping sleeves and sleeve tensioning spindles in other diameters available on request. Prod. Gr. 205Continued next pageDelivery: in wooden caseTensioning spindle MZE setsClamping range mm 12-26 25-55Consisting of: 1 piece sleeve tensioning spindle each No. Ident. No. 010-020-030-040-050 060-070-08022300Consisting of: 1 sleeve each No. 22301 mm 12-14-16-18-20-22-24 25-30-35-40-45-5022300 Sleeve tension spindles in sets Ident. No. 200 210Set price E O. R. (O. R.)Prod. Gr. 205Ident. No. 200Continued next pageChuck heads SPDesign: with smooth profile, increasing in increments of 0.5 mm, other profiles increasing in incrementsof 1.0 mm.Indicate the requested clamping diameter in your order.Application: for all common axial compression and tension systems on turning machines and vices.Advantages: long-proven, high-stability rubber-metal connection, high holding forces.Size 42 65ShapeCross and longitudinalCross groves smooth Cross and longitudinalCross groves smoothgroovesgroovesClamping Ø mm 11-42 8-11 4-42 11-65 8-11 6-6522367 Chuck heads Ident. No. 120 115 110 320 315 310SPUnit price E (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.)22367 ChangingdeviceIdent. No. 442 465Unit price E (O. R.) (O. R.)Changing deviceh Other diameters on request, forms (square, hexagonal) and collet chuck available. Prod. Gr. 280Continued next pageSTOPAX hollow spindle limit stopsfor lathes, to limit length in spindleExecution: consisting of clamp body, extension and special key. Set up: the first work piece is clamped. The STOPAX limit stop is inserted into the hollow spindlefrom behind using the special key until it is at the end of the work piece and can be fixed. The stop is also released and adjusted using the key.Quotation on request.Flat head No. 22331 Centre head No. 22332h Hollow spindle limit stops with different diameters on request.2011/12563