Clamping Tools - EN / Hahn+Kolb

Hydraulic clamping technologyHydraulic pressesContinued next pageHydraulic compact jackswithout spring returnExecution:Can be used in any position. Lever in plunger design, bore can hold tie bolt corresponding to the lever'sforce of pressure.Because of the closed hydraulic circuit, the equipment can be used in any position, – even under water! Thepiston is made of hardened, high-strength steel and has a pocket-hole thread to accommodate tools or fasteners.The hand lever holder on the pumping system can be swivelled through 360°, and so the actuating anglecan be adjusted to the relevant conditions.Safeguarded from overload by built-in safety valve.Delivery: in transport basket. Pressure gauge connection is possibleLoading of the lever in axial direction only and over the entire surface increases life.VersionPlungerModel 1530 3030Pressure kN 150 300Travel A mm 30 30Piston Ø B mm 40 40Structural height, positioned C mm 74 79Length D mm 255 285Width E mm 70 98Length of hand lever G mm 262 262Max. required leverage F N 240 24029763 Ident. No. 010 030Unit price E (O. R.) (O. R.)Metal-cutting toolsProd. Gr. 269Continued next pageHydraulic bench pressesforce of pressure 101 kNExecution: compact construction, easy to transport and usable on changing work stations in vertical andhorizontal position.Delivery: ready for operation with hose 1.8 m long and manometerAppropriate protective measures must be taken for operations where there is the risk of handinjury from the press tool.Model BSM 1117Force of pressure at 700 bar kN 101,7Cylinder stroke mm 155Cylinder model RC 106 (No. 29500 050)Return strokeSpring returnType of pumpHand pumpPump model P-142 (No. 29700 210)Dimensions B/C mm 620/432Dimension F mm 43029769 Ident. No. 010dUnit price E (O. R.)d = Delivered ex works, postage and packaging excluded. Prod. Gr. 258Continued next pageHydraulic workshop pressesforce of pressure 500–930 kNForce of pressure up to 232 kNExecution: framework welded high-strength profile steels. Adjustable mounting plate. Cylinder holder nonadjustable.Force of pressure 500-930 kNExecution: universal application. Welded frame construction. Crosshead and mounting plate heightadjusted hydraulically. Electro-hydraulic pump unit, voltage 400 V-3 Ph. Other voltages available onrequest. Built-on solenoid valve with cable remote control.Delivery: ready for operation with hose 1.8 m long and manometer. Vee-block on request.Appropriate protective measures must be taken for operations where there is the risk of handinjury from the press tool.Model VLP 5013 ZE5S VLP 10013 ZE3SCapacity kN 500 930Travel mm 155 / 330 168 / 330cylinder double-acting double-actingOverall height mm 2020 2065Clear height mm 355–1335 305–1145Overall width mm 1470 1720Clear width mm 800 1000h Additional information, advice and quotations available on request.VLP 50132011/12651