Clamping Tools - EN / Hahn+Kolb

More documents

Recommendations

Info

Tool holding fixturesTool holding fixtures DIN 69893 HSKContinued next pageUniversal expansion clamping chucks SINO-Rfor heavy-duty machiningExecution: hollow taper shank acc. to DIN 69893-1 shape A.For inner cooling supply coolant transfer pipe No. 23715 page 542 is required.Execution: innovative expansion clamping technology, through axial tightening of the clamping sleeve withthe SINO hook wrench, the elastic pressure medium is clamped against the expansion sleeve. The expansionsleeve stretches uniformly in the direction of the chuck centre axis.Fine-balanced G 2.5 at 25000 1 /min.Advantages: very good damping properties, extension of tool service life, improvement of surface qualityon work piece, improvement in life of machine spindle, highly precise centric tension, concentricity tolerance0.005 measured in the clamping hole, suitable for high speeds, tensioning of shanks DIN 1835 A+Band DIN 1835 E (whistle notch), axial length adjustment with repeat precision of ± 0.005 mm.Heavy-duty machining properties: maximum clamping force 450 Nm / D 20 mm, reinforced expansionsleeve made of high-end elastomer, suitable for heavy-duty machining, additional brass cover sleeve formaximum torque, suitable for rough cutting and copy milling.Location taper HSK-A 63Clamping Ø D1* mm 12 20Outside Ø the clamping sleeve D 2 mm 39 48Collar Ø D 3 mm 44,45 49,72A dimension, setting gauge L1 mm 80 85Clamping depth L 2 mm 46 51Path of length adjusting screw L 3 mm 10 10Active clamping length L6 mm 33 38Length chuck head L 7 mm 54 59G M 8 x 1 M 10 x 1Torque Nm 150 45023737 Ident. No. 010 020Unit price E (O. R.) (O. R.)AL3L1L7L4GL6L2D1L5D2D3Metal-cutting tools* For tool tolerance h 6.h Reducing bushes see No. 23336 page 540.Bush remover see No. 23348 page 540.Hook wrench see No. 23349 page 540.i Tool holding fixtures selection overview page 492.Prod. Gr. 229Continued next pageBlanksExecution: hollow taper shank acc. to DIN 69893-1 shape A.Application: manufacture of customised special tools.Material: hardened tempered steel with tensile strength at the core of at least 1000 N/mm².Delivery: taper nitrided and ground, straight soft shank with an overmeasure of 0.3 mmHSK A/d mm 40 50 63Size d1 mm 40 50 63Dimension A mm 120 150 15023755 Ident. No. 030 040 050Unit price E (O. R.) (O. R.) (O. R.)i Tool holding fixtures selection overview page 492. Prod. Gr. 290Continued next pageInnovationsShrink-fit chucks with wideningWidening: shrink-fit chucks with widening for more process safetyAll ThermoGrip shrink-fit chucks are designed with widening. Through this, the shanks are pre-centred, the shrinking process can be done automatically,without using the hand.JetSleeve® – the innovative fluid supplyDelivery: 15 m high pressure hose (rotary mounting), integrated hose reel, easy press gun with Softgrip inlay, 850 mm stainless steel pipe rotatable under pressure,dirt cutter, triple nozzle (0°/25°/40°)121 Widening Shrink-fit chuck with JetSleeve® Product video:use your mobile phone to scan the QR code.32011/12523
Tool holding fixturesTool holding fixtures DIN 69893 HSKMetal-cutting toolsContinued next pageShrink-fit chucks HSK AExecution: hollow taper shank to DIN 69893-1 shape A. Permissible concentricity tolerance of hollowtaper shank to bore of holder d1 < 0.003 mm. The clamping diameter is designed for a shank tolerance ofh6.Fine-balanced G 2.5 at 18000 1 /min.Ident. No. 150-157 long versionIdent. No. 250-258 extra long versionDelivery:With integrated, stop screw. Other models and dimensions available on request.HSK A x d 1 mm 63 x 3 63 x 4 63 x 5 63 x 6 63 x 8 63 x 10 63 x 12Dimension d2 mm 15 15 15 21 21 21 21 21 21 24 24 24 24 24 24Clamping length I 1 max. mm 20 20 25 36 36 36 36 36 36 42 42 42 47 47 47Dimension A mm 90 90 90 80 120 160 80 120 160 85 120 160 90 120 160Setting range V mm 5 5 5 10 10 10 10 10 10 10 10 10 10 10 1023420 Ident. No. 603 604 605 050 150 250 051 151 251 052 152 252 053 153 253Unit price E O. R. O. R. O. R. O. R. O. R. (O. R.) O. R. (O. R.) (O. R.) O. R. O. R. (O. R.) O. R. (O. R.) (O. R.)HSK A x d 1 mm 63 x 14 63 x 16 63 x 18 63 x 20 63 x 25Dimension d 2 mm 27 27 27 27 27 27 33 33 33 33 33 33 44 44Clamping length I 1 max. mm 47 47 47 50 50 50 50 50 50 52 52 52 58 58Dimension A mm 90 120 160 95 120 160 95 120 160 100 120 160 115 160Setting range V mm 10 10 10 10 10 10 10 10 10 10 10 10 10 1023420 Ident. No. 054 154 254 055 155 255 056 156 256 057 157 257 058 258Unit price E O. R. (O. R.) (O. R.) O. R. (O. R.) (O. R.) O. R. (O. R.) (O. R.) O. R. (O. R.) (O. R.) O. R. (O. R.)h For inner cooling supply coolant transfer pipe No. 23715 is required page 542.i Tool holding fixtures selection overview page 492.Prod. Gr. 297Continued next pageShrink-fit chucks HSK EExecution: hollow taper shank to DIN 69893-5 Form E. Concentricity tolerance of hollow taper shank tobore of holder d1 < 0.003 mm. The clamping diameter is designed for a shank tolerance of h 6.h HSK 40/50 on request also available as JetSleeve® design.Fine-balanced G 2.5 at 40000 1 /min.Type of the surface: the new generation of shrink-fit chucks features an oxidation-free coat to preventcorrosion due to dry machining and discolouration upon shrinking. The chucks can dry without using corrosioninhibitors.Delivery:With integrated, stop screw. Other models and dimensions available on request.HSK E x d 1 mm 40 x 3 40 x 4 40 x 5 40 x 6 40 x 8 40 x 10 40 x 12Dimension d 2 mm 15 15 15 20 21 20 21 24 24 24 24Clamping length I1 max. mm 20 20 25 36 36 36 36 42 42 47 47Dimension A mm 60 60 60 80 65 80 65 65 80 65 90Setting range V mm 5 5 5 10 – 10 – – 10 – 1023420 Ident. No. 403 404 405 430 460 431 461 462 432 463 433Unit price E O. R. O. R. (O. R.) O. R. O. R. (O. R.) (O. R.) O. R. (O. R.) O. R. (O. R.)HSK E x d 1 mm 40x16 50x3 50x4 50x5 50x6 50x8 50x10 50x12 50x16Dimension d 2 mm 27 27 15 15 15 20 20 24 24 27Clamping length I 1 max. mm 50 50 20 20 25 36 36 42 47 50Dimension A mm 65 90 80 80 80 80 80 85 90 95Setting range V mm – 10 5 5 5 10 10 10 10 1023420 Ident. No. 465 435 503 504 505 440 441 442 443 445Unit price E (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.)h For inner cooling supply coolant transfer pipe No. 23715 is required page 542.i Tool holding fixtures selection overview page 492.Prod. Gr. 297524 2011/12
Page 1 and 2: Clamping toolsChapter overviewConti
Page 3 and 4: Drilling tool clamping devicesReduc
Page 5 and 6: Drilling tool clamping devicesDrill
Page 8 and 9: Drilling tool clamping devicesDrill
Page 10 and 11: Clamping devices for thread-cutting
Page 12 and 13: Clamping devices for thread-cutting
Page 14 and 15: Tool holding fixturesTool holding f
Page 64 and 65: Shrink technologyHorizontal shrinki
Page 66 and 67: Shrink technologyShrink accessories
Page 68 and 69: Measuring and presetting equipmentT
Page 70 and 71: Measuring and presetting equipmentT
Page 72 and 73: Lathe and rounding machine accessor
Page 94 and 95:
Lathe and rounding machine accessor
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Magnetic clamping technologyPermane
Page 106 and 107:
Magnetic clamping technologyPermane
Page 108 and 109:
Magnetic clamping technologyMagneti
Page 110 and 111:
Vacuum clampingDividing headsContin
Page 112 and 113:
Dividing headsDividing headsContinu
Page 114 and 115:
Tool guidingsSlide guidewaysContinu
Page 116 and 117:
Conventional workpiece clampingMech
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Conventional workpiece clampingQuic
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Positioning elementsParallel suppor
Page 136 and 137:
Positioning elementsMounting device
Page 138 and 139:
Workpiece clampingWorkpiece clampin
Page 140 and 141:
Workpiece clampingPrecision vicesCo
Page 142 and 143:
Workpiece clampingMachine vicesCont
Page 144 and 145:
Workpiece clampingMachine vicesCont
Page 146 and 147:
Workpiece clampingHigh-pressure mac
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Workpiece clamping5-axis machine vi
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Workpiece clampingMultiple clamping
Page 162 and 163:
Workpiece clampingMulti-function cl
Page 164 and 165:
Hydraulic clamping technologyHydrau
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172:
show all

Clamping Tools - EN / Hahn+Kolb

Create successful ePaper yourself

Delete template?

Save as template?