Clamping Tools - EN / Hahn+Kolb

Workpiece clampingWorkpiece stopsMetal-cutting toolsContinued next pageWorkpiece stopsadjustable in five axesApplication: for use on drilling and milling machines.Execution: quickly adjustable, flexible, stable. For T-nuts with thread M8Delivery: with T-nuts 12 and 14 mm26111 Workpiece stops withIdent. No. 020T-nuts 12 and 14 mmUnit price E O. R.For slot width mm 12 14 16 1826195 T-nuts Ident. No. 039 048 057 067Unit price E O. R. O. R. O. R. O. R.i Selection overview vices page 617. No. 26111 = Prod.-Gr. 281No. 26195 = Prod. Gr. 26015521075 – 21041Continued next pageMagnetic workpiece stopsApplication: for use on drilling and milling machines.Execution: The powerful magnets make the reliable holding position possible for quick attachment at thevice.Advantages:•handy design with very high holding power•simple yet effective handling•universal application•small space-saving size•reduction of the set-up times thank to fast toolingDelivery: with threaded rods26111 Magnetic workpiece stop Ident. No. 120Unit price E O. R.i Selection overview vices page 617. Prod. Gr. 281Continued next pageLimit stopsApplication: as workpiece stop on tool machines. The short design ground to ± 0.01 mm height toleranceis also suitable as support for offset workpieces.Execution: steel construction, limit stop case-hardened and ground. The rhomboid holding plate allowsinsertion and clamping of the limit stop at any point on the T-slot.Supplied as a set = 8 pieces – 4 short and 4 long limit stops of the same slot width – in wooden case.Slot nominal dimensions b (h6) mm 12 14 16 18l 1* mm 25* 25 50* 25 25 50*a (- 0,6) mm 12 14 14 16 18 18d 1 (± 0,01) mm 20 32 32 32 40 40H mm 6 8 8 8 10 10l 2 mm 8 9 9 10 15 15Screws DIN EN ISO 4762 M 6 x 35 M 8 x 35 M 8 x 60 M 8 x 45 M 10 x 50 M 10 x 7526253 Ident. No. 020 025 030 035 045 050Unit price E O. R. O. R. O. R. (O. R.) O. R. O. R.* Long version Tolerance = ± 0.2 mm.h Other sizes on request.i Selection overview vices page 617.Prod. Gr. 265Continued next pageUniversal interchangeable false jaws with angle preadjustmentApplication: for clamping workpieces for milling, drilling or grinding at an angle of 0° to 45°.Compatible with any kind of vice and jaw.Function: by releasing the two screws the desired angle can be set on the contact disk of the workpiece.Assembly: the jaw is placed against the fixed jaw of the vice. Precise positioning is effected by means ofthe dead stop. The jaw is fixed by the inlaid magnet.Jaw width L mm 125 160Jaw height b mm 42 52Depth D mm 10 10Equipment A mm 73 10028912 Ident. No. 125 160Unit price E (O. R.) (O. R.)AL1Bi Selection overview vices page 617. Prod. Gr. 2812 3D4618 2011/12