Clamping Tools - EN / Hahn+Kolb

Conventional workpiece clampingMechanical clamping elementsContinued next pageClampsExecution: with stepped teeth, hardened and tempered steel, lacquered.Application: suitable packing blocks No. 26150-26151 page 599.DIN 6314 ZMetal-cutting toolsSlot width mm 9 11 14 18 22 26Length mm 60 100* 80 125* 100 160* 125 200* 160 200Width mm 25 25 30 30 40 40 50 50 60 70Height mm 12 12 15 15 20 20 25 25 30 30For screws M 8 M 8 M 10 M 10 M 12/M 14 M 12/M 14 M 16/M 18 M 16/M 18 M 20/M 22 M 2426136 Ident. No. 020 025 030 035 040 045 050 055 060 070Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. (O. R.)* The long version is designed for large jaw openings through wide slot intervals or larger clamping depth on the work piece, e. g. on engraving machines.h Aluminium version and other sizes on request.Prod. Gr. 260Continued next pageClamps DIN 6316Execution: stepped once, hardened and tempered steel, DIN 6316, lacquered.Slot width mm 6,6 9 11 14 18 22 26Length mm 60 80 100 125 125 160 160 200 200 250Width mm 20 25 30 40 50 50 60 60 70 70Height mm 10 x 20 12 x 25 15 x 30 20 x 40 25 x 50 25 x 50 30 x 60 30 x 60 35 x 70 35 x 70For screws M 6 M 8 M 10 M 12 and M 14 M 16 and M 18 M 16 and M 18 M 20 and M 22 M 20 and M 22 M 24 M 2426138 Ident. No. 010 020 030 040 050 060 070 080 090 100Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.h Other sizes and aluminium alloy version on request. Prod. Gr. 260Continued next pageClamping claws straightwith support screw, hardened and tempered steel, lacqueredFor table slots to DIN 650 mm 10 12 14 16 18Clamping range mm 8-32 10-40 10-38 13-48 13-46Tensioning screw DIN 787 M 10 x 12 x 12 x 16 x 16 xmm 10 x 80 12 x 100 14 x 100 16 x 125 18 x 125Clamp length x width mm 80 x 30 100 x 40 100 x 40 125 x 50 125 x 5026221 Ident. No. 010 020 030 040 050Unit price E O. R. O. R. O. R. O. R. O. R.Prod. Gr. 260Continued next pageStepped clampswith support screw, hardened and tempered steel, lacqueredFor table slots to DIN 650 mm 10 12 14 16 18Clamping range mm 22-46 28-58 28-56 36-71 36-69Tensioning screw DIN 787 M 10 x 12 x 12 x 16 x 16 xmm 10 x 80 12 x 100 14 x 100 16 x 125 18 x 125Clamp length x width mm 100 x 30 125 x 40 125 x 40 160 x 50 160 x 5026222 Ident. No. 010 020 030 040 050Unit price E O. R. O. R. O. R. O. R. (O. R.)Replacement support screws,hardened and tempered,tensile strength class 8.8for No. 26221 and 26222Thread/total length mm M 10 x 47 M 12 x 59 M 16 x 6826222 Ident. No. 110 112 116Unit price E O. R. O. R. O. R.Prod. Gr. 260596 2011/12