Clamping Tools - EN / Hahn+Kolb

Hydraulic clamping technologyHydraulic toolsContinued next pageMore than 200 different heavy-duty cylindersCLR-series - 1000-10000 kN compressive force•robust heavy-duty cylinder•double-acting for precision driving•used in areas of construction, in maintenance and in the off-shore sphere•double-acting•60 models•50-300 mm travel length•full-plunger construction – plated•built-in overload protection•grooved thrust piece (hardened)•optional interchangeable moving thrust pieces (CAT model)CLS-series - 500-10000 kN compressive force•cylinder for support, stroke and lowering jobs on construction sites•internal and external corrosion proofing protects the cylinders even for short-term use under water.•single action, without spring return•66 models, 50-300 mm stroke length•special PTFE coating for increased protection against corrosion•grooved thrust pieces (hardened)•optional with interchangeable moving thrust pieces (CAT models)•injection well to limit stroke•large lateral load-bearing capacityh Additional information, advice and quotations available on request.Metal-cutting toolsContinued next pageAir hydraulic single piston pumpsfor single-acting cylinders,operating pressure max. 700 barExecution: for hand or foot operation with built-in 3-way air valve that automatically holds the load whencompressed air is reduced. No idle running as the pump only works when the oil requires pumping. Onreaching the set pressure, the pump automatically shuts off. The pump can be connected to any compressedair line system with a min. output of 250 l/min.•with sound suppressor•oil connection rotating•air connection 1 /4"-18 NPT•with pressure control valveDelivery: pumps with oil fillingAttention!For safety reasons it is advisable to protect the rocker button of the pumps from falling objects using aguard bow.Model PA 133 PATG-1102 N*Useful volume of oil cm³ 600 2100Current l/min 0,680 1,000/0,160Minimum air pressure bar 4,2 1,7Maximum air pressure bar 8,6 8,6Oil connector thread 3/ 8-18 NPT 3/ 8-18 NPT29703 Ident. No. 015 030Unit price E (O. R.) O. R.Ident. No. 015* 2-stage. Prod. Gr. 258Ident. No. 030Continued next pagePneumatic hydraulic pumps, XA seriesVersion:•ergonomic design for less operator fatigue•variable pumping volume and precision controller•increased pumping volume for higher productivity•closed hydraulic system prevents contamination and allows to use the pump in any position•pedal locking function for withdraw position•earthing screw for optimised ATEX explosion protection•externally settable pressure valveOptions:•manometer• 4 /3 control valve for double-acting cylinders•2 litre tank for large hydraulic tools•pedal looking, protects both pedals against accidental actuation (to be installed by the customer)•set of joystick levers (to be installed by the customer)•hydraulic rotary connector for optimum alignment of hose (to be installed by the customer)h Additional information, advice and quotations available on request.2011/12647