Clamping Tools - EN / Hahn+Kolb

Workpiece clampingHigh-pressure machine vicesMetal-cutting toolsContinued next pageMachine vicesadjustable on 3 levels 1 x 360°, 2 x 90°Application: for grinding (WZ machine tool grinder) and light milling and drilling where work pieces are tobe machined in one set-up at different levels.Execution: as all the swivel centre points are on one level, high stability and vibration-free operation isguaranteed even with very heavy machining. Guide ways and spindle are well protected from chips.Jaw width mm 80Clamping range C mm 80Jaw height b mm 25Body length F mm 235Overall length D mm 325Overall body height E mm 163Body width K mm 116Slot width g 20 H 728745 Ident. No. 080Unit price E O. R.i Selection overview vices page 617. Prod. Gr. 281360°90°chACEdFgKContinued next pageHigh pressure machine vicesApplication: for individual and serial production on drilling and milling machines.Execution:•clamping system mechanical-hydraulic with mechanical pretensioning via crank•steel body, forged, guide ways hardened and ground•aligned on the machine bed: Longitudinally and transversely via grooves and T-nuts No. 26196 page 602•rough adjustment of clamping range using pins•pretensioning facility for elastic parts (stacked mounting)Supplied with 1 set standard jaws (1 side smooth, 1 side grooved) and crank.20 H7 b1yBD maxAE20H7CFJaw width b mm 90 125Range S mm 0-150 0-220Jaw height C/jaw width Y mm 39,6/15,6 39,6/15,6Body length F mm 370 460Overall length Dmax mm 551 683Overall height E / height G mm 59/99 70/112Clamping force kN 25 4028832 Vices Ident. No. 092 127Unit price E O. R. O. R.Slot width b 1 mm 14 14A x C mm 242 x 30 280 x 30B x D mm 134,5 x 212 162 x 25228832 Swivel base Ident. No. 093 128Unit price E O. R. O. R.DEG20B20H7KC19166M2 16 24Ø201019.5Ø12Ai Selection overview vices page 617. Prod. Gr. 281624 2011/12