Clamping Tools - EN / Hahn+Kolb

Clamping devices for thread-cutting toolsTapping attachmentsContinued next pageContinued next pageArbourshardened and groundApplication: for TAPMATIC tapping attachments with tapered location hole for Jacobs taper ISO 239. Shanks for DIN 238 taper bore see No. 21270 page 483.Jacobs location taper Ident. J 33 J 3 J 4Morse taper MT 2 3 4 2 3 4 421619 Ident. No. 020 030 040 120 130 140 240Unit price E O. R. O. R. (O. R.) O. R. O. R. (O. R.) (O. R.)Rubber Flex colletsProd. Gr. 240The jaw segments, which are bonded firmly with the special rubber, are moved in parallel over the wholeclamping range and clamp the tool shank over the entire length of the bore in this way. Precision in centricclamping the tool throughout the whole of clamping range is thus assured.DIN 238-1Metal-cutting toolsType J 115 J 116 J 117 J 423 J 421 J 420 J 422 J 443 J 441 J 440 J 445Clamping range mm 1-2,5 2,5-4,5 4,5-6,5 2-4,5 3,5-6,5 4,5-8 6,5-10 2,8-7 4,5-10 7-13 9-1521655 Ident. No. 010 020 030 040 050 060 070 080 090 100 105Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. (O. R.)Prod. Gr. 241Continued next pageMin. quantity lubricating device FLUID DISPENSERwithout magnet support, working air pressure 3.5 –6 bar required.Application: to lubricate during thread cutting and drilling, for the fine machining and for the rationalization of the workstation.The pneumatically operated FLUID DISPENSER fires a drop of cutting coolant precisely on the desired spot. Thequantity of fluid required can be set exactly on the device. Especially suited for use in automatic production.Advantages: accurate uniform lubrication, clean work piece surfaces, economical consumption of cuttingcoolant, no spray mist, precise and even dosing and possibility of automation.Length = 150 mm, clamp Ø = 8 mm, capacity 1 litre.Range of products: Nozzle with pump, tank and approx. 1 m hose.Ident. No. 100: pivoted level valve for automated lubrication. Other actuation probes on request.Ident. no. 105: foot valve for manual actuation of the lubrication21665 Coolant lubricator FLUID DISPENSER type 25–S Ident. No. 010Unit price E O. R.21665 1-l-tank with holder Ident. No. 015Unit price E O. R.21665 Pivoted lever valve RW 3-M 5 Ident. No. 100Unit price E (O. R.)21665 Foot valve Ident. No. 105Unit price E (O. R.)Illustration optionalh TOOLREX cutting fluids see No. 18300 page 467 Prod. Gr. 241Continued next pageHigh performance tapping attachmentsWith reverse movement for NC machines, especially for serial production on machining centres with automatic tool change and internal coolant supply for highcutting speeds, model series RDT, RDTiC and RCT for thread M 1-M 25.With the new type RCT a number of improvements have been made in the model series. It has been possible to develop thread-cutting equipment of higherefficiency (higher speed) and greater process reliability thanks to the more lightweight spindle, the larger release spring and better sealing now used, to mentiononly a few of the improvements.h TAPMATIC tapping attachments see No. 21610 page 490Complete TAPMATIC range for all machines available on request.t Technical Hotline +49 (0)711 9813-360with internal coolant supply and returnwithout change of rotary direction of main spindlewith holder HSK-A2011/12491