Clamping Tools - EN / Hahn+Kolb

Positioning elementsMounting devicesContinued next pageAngle plates for mountinggrey ironSimple, stable design, with machined clamping surfaces and reinforcing ribs.Squareness tolerance 0.04/100 mm.Length L approx. mm 150 200 275 400Width b approx. mm 75 100 150 225Height h approx. mm 100 150 200 300Weight approx. kg – – 15 4526260 Ident. No. 010 020 030 040dUnit price E O. R. O. R. O. R. O. R.d = Delivered ex works, postage and packaging excluded.h Other sizes on request.Prod. Gr. 264LBHMetal-cutting toolsContinued next pageSine tablescast iron, simple designExecution:•can be clamped in any angular position.•both standing areas planed•movable through 90°.Clamping surface approx. mm 300/300 390/400Floor area approx. mm 255/300 300/370Height of clamping area,horizontal approx. mm 160 210Number of T-slots 3 4T-slots similar to DIN 650 mm 14 14Weight approx. kg 45 6526300 Ident. No. 030 040dUnit price E O. R. O. R.d = Delivered ex works, postage and packaging excluded.h Other sizes and more precise tolerances on request.Prod. Gr. 264Continued next pageBoxescast ironExecution: with slots to clamp workpieces. Can also be used as steel parallels. Squareness tolerance toDIN 875 accuracy level 2, end face cleanly milled.Length L approx. mm 250 300 500Width b approx. mm 150 200 300Height h approx. mm 100 150 250Slot width approx. mm 18 18 22Weight approx. kg 10 20 8526302 Ident. No. 010 020 040dUnit price E (O. R.) (O. R.) (O. R.)d = Delivered ex works, postage and packaging excluded.h Other sizes on request.Prod. Gr. 267Continued next pageDrilling tablesgrey iron, for radial drilling machines and similar.Execution: the two clamping surfaces are machined at right angles to each other. Available with coolantcollection tray at extra charge on request.h Additional information, advice and quotations available on request. Prod. Gr. 2672011/12615