You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Lathe and rounding machine accessoriesDriversMetal-cutting toolsContinued next pageModular CoA face driversclamping circle Ø 12–50 mm, turning range 13–100 mmApplication: to turn work pieces over the entire length, without rechecking. It is possible to retool quicklyto a different work piece Ø using shell-type driving plates. The driving disc adapts to unevenness and workpiece end faces inclined up to 5° by means of the hydraulic pressure compensation of the 3 support pistons.The axially adjustable centring point is supported on the pre-tensioned disc spring stack and balancesout the different work piece centres. All the driving discs and centres fit all basic body sizes.Small assortment for turning range 13-100 mm comprising of:1 body4 driving disks for clamping circle Ø 12, 20, 32 and 50 mm2 lathe centres Ø 6 and 12 mm, in wooden box.Taper shank MT 3 422208 small assortment for right-hand motion Ident. No. 230 240Set price E O. R. O. R.h <strong>Clamping</strong> circle can be extended by supplementing the mix of small toolsFront drivers with draw-off nut on request.Front drivers with other taper shanks on request.Prod. Gr. 204suitable lathe centresHK No. 22140 on requestContinued next pageDriving discsfor CoA driver bodiesExecution: directly geared<strong>Clamping</strong> circle Ø S mm 8 10 12 16 20 25 32Turning range mm 9-16 11-20 13-24 17-32 21-40 26-50 33-64Matching Tips Ø A mm 4 4 6 10 12 16 16Drill Ø B mm 4,5 4,5 7 11 13 17 22Overall length C mm 38 38 36 33 30 30 30Length D mm 4 4 4 4 4 8 1022208 for right-hand rotation Ident. No. 308 310 312 316 320 325 332Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R.22208 for left-hand rotation Ident. No. 408 410 412 416 420 425 432Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R.h Driving discs with interchangeable carbide driving chucks on request. Prod. Gr. 204Continued next pageLathe centresfor CoA driver bodiesMatching Tips Ø A mm 4 6 10 12 1622208 Ident. No. 604 606 610 612 616Unit price E O. R. O. R. O. R. O. R. O. R.h Centres with head on request. Prod. Gr. 204Ident. No. 604-616Continued next pageDriversfor cylindrical grindingVersion: self-locking and adjustable, made of steel, hardened, tempered and ground.Simple operation: release clamping lever, insert work, clamp. The clamp diameter is adjusted using screws.<strong>Clamping</strong> range mm 8-16 16-24 24-32 32-40 40-48 48-56 56-64 64-72 80-90 90-10022220 Ident. No. 008 016 024 032 040 048 056 064 080 090Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.22220 Replacement springs Ident. No. 208 216Unit price E (O. R.) (O. R.)Prod. Gr. 264556 2011/12