Vacuum clampingDividing headsContinued next pageDemagnetising equipmentfor connection to 230 V AC, 50 Hz, operating time 100 % (50 % with full load)Application: work pieces which are machined on permanent or electro-magnetic clamping plates retainresidual magnetism. Demagnetising devices are used to remove the residual magnetism. The work piecesare placed on a pole of the device and pushed over to the other pole. This must be repeated several times,depending on the size and shape of the parts. The plates must only be switched off after removing the workpieces, otherwise magnetisation takes place once more.Unlike other apparatus, with these the intensity of the magnetic field automatically increases with the sizeof the workpiece, i. e. without workpiece slight power consumption and heat developing. The apparatus istherefore suitable for use under a conveyor belt. They are equipped with signal lamp, toggle switch, 3 mcable and plug.Model 3 4 5 4-EL*L x W x Hmm 250x165x75 288x266x75 400x300x75 280x280x80Useful width mm 150 250 280 260Current consumption without workpiece A 1,5 1,5 1,5 1,5Current consumption with workpiece A 3 3 3 3Weight Kg 11 18 24 1824491 Ident. No. 130 140 150 240Unit price E O. R. O. R. O. R. O. R.Ident. No. 130-150Metal-cutting tools* Particularly well suited for demagnetising high alloy steels, e. g. ring bearings, stamps and moulds. Prod. Gr. 230Ident. No. 240Continued next pageManual demagnetising devicesfor connection to 230 V AC, 50 Hz, protection system IP 40, operating time 50 %Application: handy device with plastic housing for demagnetising large areas by zones. The device is alsosuitable for separating steel parts and transporting light bulk material. Switched on and off by illuminatedbutton. 3 m cable with plug.Model HD-1 HD-2Length x width x height mm 200 x 105 x 85 215 x 160 x 85Effective area mm 105 x 75 150 x 95Penetration depth mm 15 30Rel. operating time (ED) % 50 50Operating time, maximum min 5 5Weight Kg 1,9 2,824492 Ident. No. 210 220Unit price E O. R. (O. R.)Prod. Gr. 230Continued next pageMagnetic field measuring equipmentApplication: easy and handy measuring instruments for checking polarity of magnetic residual fields, andfor checking the magnetic field heightCaution: keep equipment away from strong magnetic fields!Execution: tester calibrated and shows the true Gaussian value.Model 20-0-20 50-0-50Measuring range T ±0,002 ±0,00524493 Ident. No. 020 050Unit price E O. R. O. R.0.001 T = 10 G Prod. Gr. 230Continued next pageMini-quick-clamping holdersExecution:•body made of steel and anodised for corrosion protection•high clamping force•twisting security device•collet to be used: ER 25Application: With the compact quick-clamping holder, round materials can be processed easily and flexibly.Independent of the type of product characteristics (e. g. non-ferrous metals) the desired processingcan be performed.The quick-clamping holder is suited for various machining processes of round items.•CNC milling cutter•grinding•measuring•eroding (countersinking and wire)•labellingHeight of centres mm 18Body dimensions mm 36 x 36 x 58<strong>Clamping</strong> range mm 0,5-1625080 Holder Ident. No. 010Unit price E O. R.25080 Holder with back plate Ident. No. 020Unit price E O. R.Ident. No. 010 Ident. No. 020h Collets type ER No. 23320 or 23322 see 23322 page 535. Prod. Gr. 250Use2011/12589
Dividing headsDividing headsMetal-cutting toolsContinued next pageDividing headshand operatedExecution:•direct division via dividing plate with 24 positions fordividing 2-3-4-6-8-12-24•spindle fixture for collets 349E on tension,Ø 0,5-20 mm•concentricity tolerance of spindle: 0.01 mm•clamping using knurled nutApplication: thanks to the compact and manually operated divider partial tasks can be performed in a flexibleand quick manner on measuring and processing machines.Divider with adapter on Witte AlufixQuotation on request.25105 dividerIdent. No. 10025105 Divider head* Unit price E O. R.25106 Collets rising of 3-20 mm**, Unit price Ein 1 mm steps(O. R.)25107 Angle plates for mounting Unit price E (O. R.)* Divider supplied without collets, jaw chuck and angle plate.** Please specify desired hole.h Quotation for jaw chuck available on request.Prod. Gr. 250Angle plates for mountingContinued next pageDividing headsExecution: body in cast, dividing disc made of stainless steel, hardened and ground, concentricity toleranceof spindle: 0.02 mm, squareness tolerance of housing: 0.02 mm.Division options:•direct division: via dividing plate with 24 positions for dividing 2-3-4-6-8-12-24•graduation: via scale and adjustable vernier, graduation value: 1°Application: for milling, drilling, finishing, marking horizontal and vertical.Delivery: with 3 jaw chucks made of castTip height A mm 100 125 160 200Height C mm 167,5 / 254 210,0 / 301 265,0 / 382 330,0 / 469Chuck Ø D mm 125 160 200 250Width F mm 130 / 186 140 / 205 160 / 228 180 / 259Overall length L mm 215 245 300 340Bore D mm 26,5 42,0 55,0 76,0Keyway width E mm 14 14 18 18Morse taper – 3 4 4Weight Kg 17,6 32,2 55,3 86,525124 Ident. No. 100 125d 160d 200dUnit price E O. R. (O. R.) (O. R.) (O. R.)d = Delivered ex works, postage and packaging excluded.h Fixed and adjustable tailstocks on request.Prod. Gr. 270590 2011/12