Positioning elementsParallel supportsContinued next page<strong>Clamping</strong> bolt system SBSApplication: quick, reliable, collision-free clamping of both small and large workpieces for complete accessibility.<strong>Clamping</strong> procedure: screw the thread bolt 1 into the workpiece. Screw on the union nut, 2 rest theworkpiece on supports (min. support height 350 mm). Position the clamping system SBS 3-5 and clamptightly.The workpiece can be positioned extremely quickly using the four slot rails 4 5 (these are pushed in onthe machine table). No further attention has to be paid to the T-slots in the table.Advantages:•complete accessibility for machining on 5 sides•collision-free positioning the tools•the same clamping points on the workpiece are used irrespective of the T-slot table•complete flexibility from the T-slot rails on the machine table•direct transfer of the clamping forces•set-up times can be halved by using the thread already available for fastening•extremely quick and flexible clamping and releasing•space-saving system•one-man operationScope of delivery for basic set:4 1x T-slot rail (including holes for all common table slot widths), 2 1 x union nut (with 2 brass bushesand knurled), 3 threaded bolts R-L (for the T-slot rail) with T-slot nut rhombusImportant: The following items are needed as well: 1 Threaded bolts (for the component),5 1 x set of T-slot nuts for the T-slot rail (same size as the slots in the machine table)12345Metal-cutting toolsExample of applicationDesignation Basic set Threaded bolts 1 T-slot nut 5Size – M 10 M 12 M 16 M 20 M 24 14 16 18 20 2226248 Ident. No. 100 011 012 013 014 015 021 022 023 024 025Unit price E – O. R. O. R. O. R. O. R. O. R. – – – – –Price/pair E – – – – – – O. R. O. R. O. R. O. R. O. R.Set price E O. R. – – – – – – – – – –h Spare parts can be ordered any time. Prod. Gr. 280Continued next pageParallel piecessteel, case-hardened, finely ground in pairs and true-to-angleIn pairs, tolerance IT 5, nominal dimensions to DIN ISO 2768-1 tolerance group m.Application: can be used as bearing blocks, stops or distance pieces on machine tools, for machine vicesor marking plates for the parallel contact of workpieces. Due to the positive stepping the parallel piecesare also useful for marking. It is possible to lay two sizes on top of each other, and so many combinationsare possible. Several similarly aligned pairs are available on request.Height h mm 8 10 12 16 20 12 16 20Width b mm 2,5 3,2 4 5 6,3 4 5 6,3Length L mm 63 63 63 63 63 100 100 100Parallelism tolerance tp1 mm 0,006 0,006 0,008 0,008 0,009 0,008 0,008 0,009Parallelism tolerance tp2 mm 0,004 0,005 0,005 0,005 0,006 0,005 0,005 0,00626257 Ident. No. 208 210 212 216 220 312 316 320Price/pair E O. R. O. R. (O. R.) O. R. O. R. O. R. O. R. O. R.DIN 6346 PHeight h mm 25 32 40 25 32 40 50Width b mm 8 10 12 8 10 12 16Length L mm 100 100 100 160 160 160 160Parallelism tolerance tp1 mm 0,009 0,011 0,011 0,009 0,011 0,011 0,011Parallelism tolerance tp2 mm 0,006 0,006 0,008 0,006 0,006 0,008 0,00826257 Ident. No. 325 332 340 425 432 440 450Price/pair E O. R. O. R. (O. R.) O. R. (O. R.) O. R. (O. R.)Prod. Gr. 2602011/12613
Positioning elementsParallel supportsMetal-cutting toolsContinued next pageParallel rests in precision designin a precision versionSteel, hardened, parallelism and dimensional tolerance of 0.004 mm.Finely ground in pairs. Narrow longitudinal surfaces are flat, parallel and machined with precisedimensions.Height mm 14 16 18 20 22 24 26 28 30 32 35 40 45 50Length x width mm 150 x 10Parallelism and dimension tolerance mm 0,00435221 Ident. No. 010Set price E O. R.Prod.-Gr. 353Calibrationon request.Continued next pageParallel support setssteel, hardened, finely ground, true to angleh Other versions on request.Delivery: in wooden case with 14 pairs of packing pieces. Height tolerance within a pair 0.01 mmHeight mm 14 16 18 20 22 24 26 28 30 32 35 40 45 50Length x width mm 150 x 10 150 x 10Pair tolerance H mm 0,010 0,010Nominal size tolerance H + W (DIN 7168 m) mm ± 0,02 –Nominal size tolerance H (DIN 7168 m) mm – ± 0.20 (at height 14-30)± 0.30 (at height 32-50)26256 Ident. No. 010 020Set price E O. R. O. R.Prod. Gr. 264Continued next pageParallel support setssteel, hardened, finely ground, true to angleIn pairs, tolerance IT 5, absolute dimension to DIN 7168 average.h Other versions on request.Supplied in wooden stands.Set steel parallels mm 2-24 8-42*Consisting of Pair 20 24 241 pair each of Length mm 100 125 150Width x height mm 2 x 5 2 x 10 2 x 152x203x63x113x163x214x74x124x174x225 x 8 5 x 13 5 x 185x236x96x146x196x248 x 11 8 x 16 8 x 218 x 26 8 x 31 8 x 3610 x 13 10 x 18 10 x 2310 x 28 10 x 33 10 x 3812 x 15 12 x 20 12 x 2512 x 30 12 x 35 12 x 4014 x 17 14 x 22 14 x 2714 x 32 14 x 37 14 x 428x11 8x16 8x218x26 8x31 8x3610 x 13 10 x 18 10 x 2310 x 28 10 x 33 10 x 3812 x 15 12 x 20 12 x 2512 x 30 12 x 35 12 x 4014 x 17 14 x 22 14 x 2714 x 32 14 x 37 14 x 4226254 Ident. No. 010 020 030Set price E O. R. O. R. O. R.* Except 9 mm. Prod. Gr. 264Continued next pageWave-shaped parallel support setsWave-shapedIn pairs, tolerance IT 5, nominal dimensions to DIN ISO 2768-1 tolerance group m.Application: for very small or very narrow workpieces.Execution: spring steel, hardened and tempered, precision-ground.MB 0 - 100 N No. 127•very narrow as well as small workpieces can be clamped in parallel in the vice.•no chips on the support surface•pair tolerance tp height IT 5•nominal size tolerance height ± 0.004 mmDelivery: in wooden caseHeight mm 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39Set Size mm 9-23 25-39Length x width mm 110 x 0,3 110 x 0,3Consisting of 8 pairs 8 pairs26258 Ident. No. 110 120Set price E O. R. O. R.Prod. Gr. 260614 2011/12