Clamping Tools - EN / Hahn+Kolb

Shrink technologyShrink accessoriesContinued next pageTool holdersApplication: for shrinking device ISG 3200 WK.Tool holding fixture ST 40 ST 50 HSK 32 HSK 40 HSK 50 HSK 63 HSK 10023401 Ident. No. 140 150 332 340 350 363 390Unit price E (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.)Continued next pageProd. Gr. 226Pressure fixturesfor broken toolsApplication: with this pressure fixture, broken shafts of a miller can be removed even if the broken pointis in the drill area. Also tool shanks where the tolerance on fit is over the tolerance limit can be cut off. Forthis, place the device on the ISG and during the warm-up with the eccentric turning handle, impress throughthe press pin set before to the correct height.Delivery: basic holder with union nut, hexagon key and adjustable press pinTool holding fixture HSK 32 HSK 40 HSK 50 HSK 63 HSK 100 ST 40 ST 5023416 Ident. No. 032 040 050 063 100 140 150Unit price E (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.)Metal-cutting toolsProd. Gr. 226Continued next pageLiquid cooler FKS 03 for shrink-on chuckApplication: for contour-dependent, quick cooling, cleaning and preserving.Closed cooling system through integrated liquid container.Advantages: the cooling period amounts to ≤ 30 seconds. The shrink adapters are degreased and susceptiblefor corrosion due to the high heat effect. The cooling concentrate effects simultaneous preservationand cleaning of the adapter, all tool cutters can be cooled depending on the shape and size.Automatic control: cooling and drying cycles run automatically via start button.Manually controlled: cool or dry with selector switch.Delivery: device ready for use, with 1 litre coolant concentrate.Colour: RAL 9002, grey white.Model FKS 03Operation Manual AutomaticCompressed air bar 6 6Width x depth x height mm 320 x 450 x 632 320 x 450 x 632Weight without coolant Kg 22,5 22,523403 Ident. No. 010 020Unit price E (O. R.) (O. R.)23403 coolant concentrate 1l Ident. No. 100Unit price E (O. R.)h Blow-off gun No. 75174 050 page 1507 and spiral hose No. 75055 010 are not included in the scopeof delivery. Please order separately.With your first order, we recommend to get the safety data sheet.j Safety data sheet also available at www.hahn-kolb.de/Downloads.Prod. Gr. 226Continued next pageTool holdersApplication: as adapter for shrinking systems ISG 2202, ISG 3202 and for liquid cooler FKS 03.461,6658520Ident. No. 111Ø114,5Ident. No. 112Tool holding fixture ST 30/40 ST 50 HSK-A 25/32 HSK-A 40/5023403 Ident. No. 111 112 120 121Unit price E (O. R.) (O. R.) (O. R.) (O. R.)For HSK 63/80/100 is no tool adapter required. Prod. Gr. 226Ø35125Ident. No. 120Ø35137Ident. No. 1212011/12545