Clamping Tools - EN / Hahn+Kolb

Workpiece clamping5-axis machine vicesContinued next pagePractical examples of the a 5-axes clamp 5 AX 100for the 5-sides machining in a clamping without problemsMetal-cutting toolsi Selection overview vices page 617. Prod. Gr. 280Continued next page5-axis compact centre vicesApplication: for 5-axis machining centres, to machine raw parts and/or to machine the sixth side.Moreover, suited for 3-axis machining.Execution:•clamping system mechanical-mechanical•spheroidal iron body (GGG)•patented quick adjustment of the clamping width•dirt-resistant thanks to encapsulated spindle•re-clamping spring washer package– secure holding forces– very low clamping force loss when clamping close to edges– very low clamping force loss when clamping with the grip inserts•stepped jaws with snap-in device for snap-in bars•max. accessibility for machining•torque wrench required ( 1 /2" square drive)Delivery: without jaws, including 4 clamping bracketsJaw width mm 125Clamping width:– stepped jaws mm 0-78– with reversed step jaws mm 0-166– grip jaws mm 10-190– grip jaw/pendulum jaw mm 6-156Body length mm 250Overall length mm 273Body height mm 100Travel mm 18Clamping force with a tightening torque of 110 Nm kN 4028741 Ident. No. 125Unit price E (O. R.)Prod. Gr. 280Continued next pageClamping jaws/accessoriesfor 5-axis compact centre vice No. 28741 125Application: for a flexible work piece clamping, for the most different machining processes.Execution: hardened and ground.Delivery:Ident. No. 215 with snap-in deviceIdent. No. 235 with 4 grip inserts and 4 supporting sleevesIdent. No. 245 with 2 grip insertsUse Jaws Accessoriesgrip jawsDesignation Stepped jaws Grip jaws Pendulum jawsJaw width mm 125 160 156Jaw height mm 39,5 25 20Jaw thickness mm 78/78 78/105 62Clamping width mm 0-166 10-190 6-15628741 Ident. No. 215 235 245Set price E (O. R.) (O. R.) –Unit price E – – (O. R.)Prod. Gr. 2802011/12633